User's Guide

PROGRAMMING
FEATURES
English
45
Editing Scan List
Scan Lists can be edited by using the CPS
(refer to CPS section on page 46)
Nuisance Channel Delete
Nuisance Channel Delete allows you to
temporarily remove channels from the Scan
List. This feature is useful when frequent,
irrelevant conversations on a channel tie up
the scanning feature, becoming a nuisance
to the user.
To delete a channel from the Scan List:
• To start scanning, press the SBx (x=1
or x=2) button (Scan has to be
programmed to either SB1 or SB2 via
CPS). SB2 by default programmed to
Down Channel.
•
Wait until the radio stops on the
channel you wish to eliminate, then
long press the SBx button to delete it.
(Cannot delete home channel - the
channel that the user enables scan on).
•
The channel will not be scanned
again until you exit Scan by short
pressing the SBx button again or by
turning the radio OFF and back ON.