Declaration of performance - Morsø S140-41

DECLARATION OF PERFORMANCE
Regulation (EU) 305/2011
No. S140-41-CPR-2013/07/01
1.
Unique identification code of product-type:
S140-41
2.
Identification element of the construction product:
Morsø S140-41
3.
Intended use or uses of the construction product, in
accordance with the applicable technical specification:
Roomheater burning solid fuel without
hot water supply
4.
Name and contact address of the manufacturer:
Morsø Jernstøberi A/S, Furvej 6, 7900
Nykøbing Mors, Denmark
5.
Where applicable, name and contact address of
authorized representative:
Not applicable
6.
System of assessment and verification of constancy of
performance of the construction product:
System 3
7.
Notified body relevant to the assessment and
verification of constancy of performance:
RRF
Notified body No. 1625
8.
Declared performance:
Harmonized technical specification
EN 13 229:2001/A2:2004/AC:2001
Essential characteristics
Performance
Fire safety
Reaction to fire
A1
Distance to combustible materials
Minimum distances, in mm.
Rear = 480
Sides = 480
Front = 800
Risk of burning fuel falling out
Pass
Emission of combustible products
CO [ 0.05%]
Surface temperature
Pass
Electrical safety
Pass
Cleanability
Pass
Maximum water operating pressure
- bar
Fluegas temperature at nominal heat output
T [276°C]
Mechanical resistance (to carry a chimney /flue)
NPD
Thermal output
Nominal heat output
Room heating output
Water heating output
7.0 kW
7.0 kW
- kW
Energy efficiency
Ƞ [78.9%] at nominal heat output
9.
The performance of the product identified in points 1 and 2 is in conformity with the declared
performance in point 8.
This declaration of performance is issued under the sole responsibility of the manufacturer identified
in point 4
Nykøbing Mors, September 1
st
2014 ____________________________
Erik Theill Christensen
Managing Director