Cut Sheet

PLUMB-TITE™
2000 SERIES PROFESSIONAL GRADE MEDIUM “HOT” BLUE
PVC SOLVENT CEMENT
Page 1 of 2
TECHNICAL SPECIFICATION: PLUMB-TITE 2000 Series Professional Grade Medium “Hot” Blue PVC Solvent Cement is recommended for
solvent welding all schedules and classes of flexible and rigid PVC pipe and fittings up to 6” with interference fit. PLUMB-TITE Solvent
Cement is a fast-setting cement specially formulated for wet conditions and/or quick pressurization. PLUMB-TITE Solvent Cement can be
used for potable water, sewer and drain, waste and vent systems. This product is compliant with California South Coast Air Quality
Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission
levels. Note: This product is not for use in a system using or being tested by compressed air or gases.
PHYSICAL/CHEMICAL PROPERTIES
Appearance Blue Liquid
Viscosity min. 500 cps @ 73° F ± 2° F
Density 7.83 ± 0.2 lbs/gallon
Lap Shear Strength (minimum per ASTM Standards)
2 hours 250 psi
16 hours 500 psi
72 hours 900 psi
Set Up Time
30° F to 50° F 4 – 5 minutes
50° F to 70° F 3 – 4 minutes
70° F to 90° F 1 – 2 minutes
Shelf Life 3 years from manufacture date
Maximum VOC per SCAQMD 1168/316A or BAAQMD
Method 40: 510 g/L
INGREDIENTS (CAS Number)
Acetone (67-64-1)
Amorphous Silica (112945-52-5)
Blue Colorant (N/A)
Cyclohexanone (108-94-1)
Methyl Ethyl Ketone (78-93-3)
PVC Resin (9002-86-2)
Tetrahydrofuran (109-99-9)
LISTINGS
NSF Standard 61 IAPMO Listed
for PW, DWV, SEWER
Meets ASTM Standard D 2564
PRODUCT NUMBER SIZE PACK CARTON WEIGHT
2066S 4 fl. oz. 24 9 lbs.
2056S 8 fl. oz. 24 16 lbs.
2046S 16 fl. oz. 24 27 lbs.
2036S 32 fl. oz. 12 26 lbs.
2024 Gallon 6 52 lbs.
Visit
www.elchem.com
for updates
1/2010
United Elchem Industries
PH: 1-800-321-9532
FAX: [phone]
TECHNICAL SUBMITTAL