OWNER'S MANUAL 6' ADJUSTABLE HEIGHT STEEL WORKBENCH WITH SOLID WOOD WORK TOP MWB722430B www.montezumastorage.
LIFE ORGANIZED Montezuma is committed to helping you succeed in both your work and personal life by being organized, prepared and equipped with the right tools, gear and home supplies at your finger tips. Keep your life organized with Montezuma. Thank you for your purchase of this Montezuma Workbench. ATTENTION TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE USING THIS PRODUCT FOR THE FIRST TIME. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
SPECIFICATIONS MAXIMUM PRODUCT WEIGHT: 1000 lb (450 kg) of static, evenly distributed weight OVERALL DIMENSIONS: 72" W x 24" D x 41" H (182.
PARTS LIST 2 3 1 5 4 REF DESCRIPTION PART NUMBER QTY 1 M5 x 18 mm Lag Screw 122327 21 2 M6 Hex Nut 122329 49 3 M6 x 10 mm Bolt 122328 49 4 Leveling Feet 122326 4 5 Montezuma Nameplate 121701 1 To order replacement parts, email service@montezumastorage.com or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). Have the part number and quantity ready. Replacement keys may be ordered using the code that appears on the face of the lock. Not all parts are covered under warranty.
21 49 M5 x 18 mm Lag Screw M6 Hex Nut Use to attach work top to frame For use with the bolts 49 4 M6 x 10 mm Bolt Leveling Feet For frame assembly For leveling the workbench 1 Montezuma Nameplate For attaching to the front of the workbench 5
ASSEMBLY Install one of the leveling feet at the bottom of each adjustable leg section. Slide each adjustable leg section onto a main leg section until you reach the desired height. Remember that the wood work top is 1.25" thick, so you will need to reduce the leg length by the 1.25" to hit your targeted height. Make sure the length of each leg is the same.
Line up the holes in the two cross bars with the holes in the top of the leg assemblies. The cross bar flange will overlap the legs at each end. Secure each cross bar to the top of each leg using two (2) nuts and bolts. Connect the braces from the cross bars to the leg assembly to improve stability, using two (2) nuts and bolts for each brace. Do not tighten fasteners until all legs are connected to the cross bars and braces.
CAUTION: You may require the assistance of a second person to complete this step. Place the work top on a soft mat with the finished top surface facing down. Place the steel frame upside down on the work top. The work top should be flush with the back of the frame – this would be the back of your workbench. It will allow the workbench to be pushed close to the wall and leave an overhang on the front of the workbench. Center the frame, right to left.
MAINTENANCE Periodically tighten all hardware and make sure workbench is level. Clean the work top with wood cleaner. SAFETY DO NOT let children play or hang on the edge of the workbench. It could tip and cause personal injury or product damage. DO NOT stand or lean on the work top. The workbench could tip and cause personal injury or product damage. DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.
3 This product is warranted to be free from defects in materials and workmanship for a period of three (3) years from the date of original purchase. If this product is defective, email service@montezumastorage.com or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). If the product is defective, we will replace the defective part at no cost to you. Please do not ship your product back to the store or to us unless we send you written instructions for return.
Manufactured by: QUALITY CRAFT Romeoville, IL 60446 service@montezumastorage.com 1-800-459-4409 (Monday to Friday, 8:00 am–4:30 pm, CST) Made in China www.montezumastorage.
