OWNER'S MANUAL ADJUSTABLE STEEL FRAME MSF4829B www.montezumastorage.
LIFE ORGANIZED Montezuma is committed to helping you succeed in both your work and personal life by being organized, prepared and equipped with the right tools, gear and home supplies at your finger tips. Keep your life organized with Montezuma. Thank you for your purchase of this Montezuma Steel Frame. ATTENTION TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE USING THIS PRODUCT FOR THE FIRST TIME. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
SPECIFICATIONS MAXIMUM PRODUCT WEIGHT: 1000 lb (450 kg) of static, evenly distributed weight Weight capacity does not include work top. Depending on the work top used, weight capacity may be reduced. FULLY EXTENDED DIMENSIONS: 64" W x 17" D x 41" H (162.5 cm W x 43.
PARTS LIST 1 2 4 3 REF DESCRIPTION PART NUMBER QTY 1 M6 Hex Nut 122329 58 2 M6 x 10 mm Bolt 122328 58 3 Leveling Feet 122326 4 4 Montezuma Nameplate 121701 1 To order replacement parts, email service@montezumastorage.com or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). Have the part number and quantity ready. Replacement keys may be ordered using the code that appears on the face of the lock. Not all parts are covered under warranty.
8 58 M6 Hex Nut M6 x 10 mm Bolt For use with the bolts For frame assembly 4 1 Leveling Feet Montezuma Nameplate For leveling the workbench For attaching to the front of the workbench 5
ASSEMBLY Install one of the leveling feet at the bottom of each adjustable leg section. Slide each adjustable leg section onto a main leg section until you reach the desired height. Take into consideration the thickness of the work top you will be using – you will need to reduce the length of the leg by the thickness of your work top to hit your targeted height. Make sure the length of each leg is the same.
Take two of the four cross bar pieces and slip them together with the top flanges facing in the same direction. You will see three sets of four holes – you can join the two cross bars together at any of these hole patterns. (The other end of each cross bar only has two holes, which will attach to a leg assembly.) For a 4' wide work top, line up the four holes labeled A in the illustration below with the four holes labeled D. For a 5' work top, line up the four holes labeled B with the four holes labeled D.
CAUTION: You may require the assistance of a second person to complete this step. Your work top should be 24" deep front to back Purchase a work top that meets your needs and fasteners to attach it to the steel frame. Place the work top on a soft mat with the finished top surface facing down. Place the steel frame upside down on the work top. Position the work top you have purchased as desired. If you want to have an overhang on all four sides, then center the workbench on your work top.
MAINTENANCE Periodically tighten all hardware and make sure frame is level. SAFETY DO NOT let children play or hang on the edge of the unit. It could tip and cause personal injury or product damage. DO NOT stand or lean on the work top on the steel frame. The unit could tip and cause personal injury or product damage. DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage. DO NOT alter this project in any manner.
1 This product is warranted to be free from defects in materials and workmanship for a period of one (1) year from the date of original purchase. If this product is defective, email service@montezumastorage.com or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). If the product is defective, we will replace the defective part at no cost to you. Please do not ship your product back to the store or to us unless we send you written instructions for return.
Manufactured by: QUALITY CRAFT Romeoville, IL 60446 service@montezumastorage.com 1-800-459-4409 (Monday to Friday, 8:00 am–4:30 pm, CST) Made in China www.montezumastorage.
