Installation Manual
ank you for purchasing your heirloom quality furniture from Montana Woodworks®. Should you have
any questions or need to contact sales or support, please do not hesitate to contact our corporate oces at
888.889.3728 or via E-Mail at: cs@montanawoodworks.com
Tools Needed: None
Before beginning assembly, please take a few moments to carefully read the instructions, familiarize yourself
with the components and understand each step of the process. Likewise, please ensure that the hardware package
contains the items as described below.
Parts List: (1) Seat Assembly, (1) Base Assembly, (1) Gas Piston, (5) Casters
Hardware List: None
Assembly Instructions:
Step 1. Remove components from shipping boxes. You may lay the cardboard on the oor to prevent marring of
nish.
Step 2. Insert casters rmly into base assembly.
Step 3. Place gas piston into the center hole of the base assembly.
Step 4. Place seat assembly onto the gas piston/base assembly.
Step 5. Apply downward pressure to seat assembly.
PLEASE NOTE: If you purchased your item “ready to nish” special care must be taken to properly apply a high
grade nal nish in a timely manner. Doing so will help protect your purchase from discoloration and damage
caused by exposure to ultra-violet light and/or weather. if the products intended use is outside, please use an
exterior rated nish to also protect from weather damage. See use and care instructions for further information.
Failure to adequately protect item by application and as needed, re-application of a nal nish may void warranty.
Assembly Instructions for Oce Chair