BT-600ANC Bluetooth® Headphones with aptX™ HD and Active Noise Cancelling P/N 41232 User's Manual
CONTENTS CONTENTS................................................................................................................................................. 2 SAFETY WARNINGS AND GUIDELINES .....................................................................4 CUSTOMER SERVICE ......................................................................................................................5 PACKAGE CONTENTS ...........................................................................................
Rejecting an Incoming Call.........................................................................................19 Terminating a Call.................................................................................................................19 Voice Assistant ...................................................................................................................... 20 USING THE AUDIO CABLE....................................................................................................
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. • These headphones are intended for indoor use only. • Do not use these headphones while operating a motor vehicle, heavy equipment, walking in traffic, or any other situation in which situational awareness is a key to safety.
CUSTOMER SERVICE The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to none. If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com. Check the website for support times and links.
PRODUCT OVERVIEW 6
LED INDICATORS The headphones feature two LED indicators. The LED on the left earcup shows the charging status, while the one on the right earcup shows the Bluetooth®, ANC, and low battery status. Left LED • Solid Red: Battery is charging. • Solid Green: Battery is fully charged. Right LED • Flashes Red and Blue: The headphones are in Bluetooth® pairing mode. • Flashes Blue Once Every 5 Seconds: Bluetooth is connected. • Flashes Blue Once per Second: Bluetooth is not connected.
CHARGING When the battery is low, the Right LED will flash red twice every 5 seconds and a voice prompt saying Battery Low can be heard. Note that the battery should be fully charged before first use and at least once every three months to keep it fresh and capable of holding a full charge. Using the included USB Type-C®, plug one end into the USB-C® port on the left earcup, then plug the other end into a USB power source, such as a wall charger (not included).
POWER Press and hold the Power Button until the Right LED either flashes blue once every 5 seconds and a voice prompt saying Connected can be heard or flashes red and blue and a voice prompt saying Bluetooth Pairing On can be heard, depending on the Bluetooth® connection status. To turn power off, press and hold the Power Button until the Right LED turns off and a voice saying Power Off can be heard. Note that if Bluetooth is not connected, the headphones will automatically power off after 5 minutes.
BLUETOOTH PAIRING Perform the following steps to pair the headphones with your mobile device. 1. Power the headphones on, then press and hold the Bluetooth Button until the Right LED flashes red and blue. A voice prompt saying Bluetooth Pairing On can be heard. Note: Momentarily press the Bluetooth Button to exit Bluetooth® pairing mode. 2. Open the Bluetooth settings on your mobile device, then scan for nearby Bluetooth devices. Locate and select the BT-600ANC entry. 3.
DISCONNECTING If you want to connect the headphones to a different mobile device, you will need to disconnect the currently paired device. To disconnect the headphones from a paired device, press and hold the Bluetooth Button until the Right LED flashes red and blue. A voice prompt saying Bluetooth Pairing On can be heard. The headphones are now ready to be paired to a different device. ANC MODES The BT-600ANC headphones offer three different listening experiences.
illuminates solid white and a voice prompt saying Ambient Sound can be heard. • NC and Ambient Sound NC Modes Off: The third selection disables both NC and Ambient Sound Modes, allowing the headphones to operated like ordinary headphones. When this mode is selected, the Right LED turns off and a voice prompt saying Ambient Sound and Noise Cancelling Off can be heard.
MULTIFUNCTION TOUCHPAD The headphones feature a unique multifunction touchpad on the right earcup. The following sections describe the gestures used to perform the various functions. Playback Control • Quickly tap the center of the touchpad Two Times to Pause or Resume playback.
Skipping Tracks • Place your finger in the center of the Right earpad a swipe Forward to skip forward to the Next Track. • Place your finger in the center of the Right earpad a swipe Backward to skip back to the Previous Track.
Incremental Volume Control • Place your finger at the top of the right earcup, then slowly swipe down to incrementally Decrease Volume one step. • Place your finger at the bottom of the right earcup, then slowly swipe up to incrementally Increase Volume one step.
Continuous Volume Control • To continuously Decrease Volume to the desired level, place your finger at the top of the right earcup, then slowly swipe down to the middle and hold there until the desired level is reached. • To continuously Increase Volume to the desired level, place your finger at the bottom of the right earcup, then slowly swipe up to the middle and hold there until the desired level is reached.
Audio Muting • Place the palm of your hand over the right earcup to mute audio. • Remove your hand from the right earcup to exit audio muting and resume normal playback.
Answering an Incoming Call • When an incoming phone call is received, quickly tap the center of the touchpad Two Times to answer the call.
Rejecting an Incoming Call • If you want to reject an incoming phone call, press and hold in the center of the touchpad. Terminating a Call • While a call is in progress, quickly tap the center of the touchpad Two Times to terminate the call.
Voice Assistant • If your connected device has a voice assistant, you can activate it by pressing and holding the center of the touchpad during normal playback. Press and hold the center of the touchpad again to disable the voice assistant. USING THE AUDIO CABLE If you want to use a wired connection, plug one end of the included 3.5mm audio cable into the 3.5mm jack on the right earcup, then plug the other end into the headphone output of your mobile device.
TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. Technical support is available through the online chat button on our website www.monoprice.com or through email by sending a message to tech@monoprice.com.
and you may be required to correct any interference to radio or television communications at your own expense. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Radio Notice for FCC Caution This FCC Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules.
Radio Notice for Industry Canada Caution This IC RSS-210 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user's authority to operate this device. This device complies with IC RSS-210.
