User Manual

 When installing this device, ensure that the mount is sufficiently robust to support

the weight of the unit and to prevent unwanted movement.

INTRODUCTION

The APS 10 is equipped with a ø35mm pole socket for mounting on most standard speaker

stands, such as the Monoprice 602350 PA Speaker Stands with Air Cushion. It also has two

M8x15mm suspension points for permanent installations. Suspension of the speaker should

ONLY be performed by a qualified Structural Contractor or Engineer. Please follow all

safety guidelines and codes for your area. Monoprice is not responsible for failure and

damages due to improper mounting practices.

FEATURES

 10" woofer with 2" voice coil and 40 oz. ferrite magnet

 1" titanium compression driver

 3.7kHz crossover frequency

 94dB sensitivity

 110dB SPL

 55Hz ~ 20kHz -3dB frequency response

 Built-in 180 watt LF amplifier and 24 watt HF amplifier

 95° horizontal and 60° vertical coverage

 ø35mm pole mounting option

 2x M8x15mm suspension point mounting option