User Manual

5
4. Put the wall switch in the on position.
5. Auto-inclusion will begin. If successful, the RGB Smart Bulb will blink blue rapidly for
5 seconds, then will illuminate steadily blue for 3 seconds. It will then remain on in
the default color (warm white).
Secure Inclusion
1. Ensure that the wall switch is in the off position.
2. Screw the RGB Smart Bulb into the light socket.
3. Put your Z-Wave® controller into learning mode (refer to your controller's manual
for instructions).
4. Put the wall switch in the on position.
5. Toggle the wall switch off and on rapidly 3 times. This should be accomplished
within 3 seconds and should end with the switch in the on position.
6. If inclusion is successful, the RGB Smart Bulb will blink green rapidly for 5 seconds,
then will illuminate steadily green for 3 seconds. It will then remain on in the default
color (warm white).
EXCLUSION
1. Ensure that the wall switch is in the off position.
2. Screw the RGB Smart Bulb into the light socket.
3. Put your Z-Wave® controller into learning mode (refer to your controller's manual
for instructions).
4. Put the wall switch in the on position.
5. Toggle the wall switch off and on rapidly 3 times. This should be accomplished
within 3 seconds and should end with the switch in the on position.