User Manual

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed

below. If anything is missing or damaged, please contact Monoprice Customer Service for a

replacement.

1x Z-Wave Plus® RGB Smart Bulb

1x User's Manual

INSTALLATION

Note: If you are installing a complete Z-Wave® system for the first time, please refer to the

installation guide of your Z-Wave Interface Controller before installing this RGB Smart Bulb.

1. Ensure that the wall switch is in the off position.

2. Screw the RGB Smart Bulb into the light socket.

3. Put the wall switch in the on position.

4. Include the RGB Smart Bulb in your Z-Wave network by following the instructions in

the

INCLUSION

section below.

5. Use the Android™ or iOS® app of an associated Z-Wave controller to adjust the

color and/or brightness, as desired.

INCLUSION

This device can be included manually or using the auto-inclusion feature.

Non-Secure Inclusion

1. Ensure that the wall switch is in the off position.

2. Put your Z-Wave controller into learning mode (refer to your controller's manual for

instructions).

3. Screw the RGB Smart Bulb into the light socket.