User manual

574 Batch data in check digit scheme doesn’t fit the format,
or, the field contains blanks.
575 The graphic included in your format could not be found.
600 Imaging error because the batch was refused.
601 An error occurred while the batch was imaging.
602 The batch was not found during imaging.
611 Font, bar code, or density in the batch doesn’t fit the
format.
612 Batch data is missing or doesn’t match the format.
613 Reference point off tag.
614 Portion of field off tag.
615 Bar code width is greater than 16 inches, or keywords
on PDF 417 bar code exceed 928.
616 A bad dot falls on a bar code and the dot cannot be
shifted. Call Customer Service to order a new
printhead or printhead kit.
618 Magnification must be 1 to 7.
Machine Faults
Errors 700 to 765 happen when there is a problem with the printer.
Error Description/Action
700 An error is pending, and the printer cannot continue
with the batch.
701 Printer received a command that it cannot execute
while it is running.
702 Check your printer’s SETUP settings.
6-12 Troubleshooting
Rev. B 12/97