Instructions
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany Copyright
©
by MONACOR INTERNATIONAL. All rights reserved. A-2087.99.01.01.2021
ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR
Bluetooth Intercom System
These instructions are intended for installers
and users of the system. Please read these in-
structions carefully prior to installation /opera-
tion and keep them for later reference.
1 Applications
The intercom system TALKSAFE-1 is used to make
conversations easier when persons are separated by
a wall, a glass pane or an acrylic glass pane, etc. (e. g.
at checkouts or service counters). The system consists
of a headset (for the staff) and a microphone unit
(forthe customers). The wireless Bluetooth technol-
ogy is used to connect the headset and the micro-
phone unit. A power supply unit for the microphone
unit and a charging cable for the headset are supplied
with the system.
2 Safety Notes
The product corresponds to all relevant directives of
the EU and is therefore marked with .
WARNING The power supply unit uses danger-
ous mains voltage. Leave servicing to
skilled personnel only. Inexpert han-
dling may result in electric shock.
•
The product is suitable for indoor use only. Protect
it against dripping water, splash water and high
air humidity. The admissible ambient temperature
range is −10 °C to +40 °C.
•
Do not use this product and immediately discon-
nect it from the power supply
1. if one of the devices is visibly damaged,
2. if a defect might have occurred after a device
was dropped or suffered a similar accident,
3. if malfunctions occur.
Any repairs must be carried out by specialists.
•
For cleaning the power supply unit, only use a dry,
soft cloth. For cleaning the microphone unit and
the headset, a commercial surface cleaner and a
soft cloth may be used. Always make sure that no
fluid gets inside the devices.
•
No guarantee claims for the product and no liability
for any resulting personal damage or material dam-
age will be accepted if the product is not correctly
used or not expertly repaired.
If the product is to be put out of operation
definitely, dispose of the product in accord-
ance with local regulations.
3 Overview
3.1 Microphone unit (customer)
1 Connection for the power supply unit provided
2 Power switch for the microphone unit
3 Potentiometer to adjust the volume
(during installation)
4 Speaker
5 Recessed Bluetooth button
Press briefly to activate / deactivate the Bluetooth
function.
Keep pressed to activate the pairing mode.
6 Bluetooth indicator (blue LED)
LED flashing rapidly (for 60 s max.) pairing mode
LED flashing slowly no Bluetooth connection
LED permanently on Bluetooth connection
LED off Bluetooth deactivated
7 IR sensor (proximity sensor)
8 Status indicators (green LED and red LED)
green
LED
on: no Bluetooth connection
off: Bluetooth connection
red
LED
on: microphone unit deactivated
(microphone and speaker off)
off: microphone unit activated
(microphone and speaker on)
9 Microphone
3.2 Headset (staff)
10 Buttons + /− to adjust the volume
11 LED indicator
blue, flashing 3 times
power on
red, on for 1 second power off
red and blue,
flashing alternately
pairing mode
blue, flashing once
every 10 seconds
connected via Bluetooth and on standby
(headphone and microphone off)
blue, flashing twice
every 10 seconds
connected via Bluetooth and activated
(headphone and microphone on)
blue, flashing twice
every 5 seconds
no Bluetooth connection
red, on charging
blue, on charging completed
red, flashing charge battery!
12 Multifunction button
Keep pressed for 3 seconds to switch on.
Keep pressed for 5 seconds to switch off.
When off, keep pressed for 5 seconds for pairing.
During operation: briefly press twice to mute /
unmute the microphone.
13 Micro USB port to charge the battery
14 Microphone
TALKSAFE-1
Order number 1000190
English
staff customer
Setup
13
14
11
10
12
12V DC ON / OFF
TALKSAFE-1
®
3
6
5
4
8
9
7
1
2