Operation Manual
55
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.6.4 STATIC
Figure. 3-28 STATIC Network setting
3.6.4.1 DDNS Link On/off
You can decide if you want to use Dynamic DNS or not under static network type with
on/off button.
3.6.4.2 Port
Configure the Port number to be used to connect to the DVR system using RAMS (Remote
Access & Monitoring System). The default Port number is port 80. Change easily by using
Jog/shuttle equipped in front panel.
3.6.4.3 IP Address
Assign a fixed IP address to the DVR. Change easily by using Jog/shuttle equipped in front
panel.
3.6.4.4 Subnet Mask
Assign the Subnet Mask. Change easily by using Jog/shuttle equipped in front panel.
3.6.4.5 Gateway
Assign the Gateway address
Change easily by using Jog/shuttle equipped in front panel.