Operation Manual

20
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Description:
1. USB
z Connect USB flash drives for backing up stored video files (8/16ch DVR only)
2. ETHERNET
z Network terminal for 10Base-T (RJ-45)
3. PTZ/AUX/ALARM
z Terminal for PTZ, sensor, alarm, and AUX IN/OUT (DB-15 Male Connector)
(4ch DVR has one only.)
4. VGA and SERIAL
z VGA : Terminal for VGA video output (DB-15 Male Connector, 4ch DVR has an option
on this)
z Serial terminal for RS-232C (PC) for console or quick installation (DB-9 Male Connector)
5. AUDIO
z IN: Audio line input
z OUT: Audio line output
6. VIDEO OUT
z Terminals for composite video and s-video to connect with monitor
7. CAMERA
z 16ch DVR: 16 Inputs ( 1~16 ch) : In order to use Loop through, please refer to Article 3.1.7.
z 8ch DVR: 8 Inputs ( 1 ~ 8 ch) : With 8 loop through, the video of each channel can be out.
z 4ch DVR: 4 Inputs( 1~ 4 ch) : One port which is below to Video output port is loop through.
It can transmit each channel’s video inputs to other DVR.
8. VIDEO OUT (SPOT and VIDEO 2), 8/16ch DVR only.
z SPOT : User can use this connector for a specific Spot Monitor.
z VIDEO 2 : With the Extra Output, user can connector with other monitor.
(Same video image as Video 1)
9. FAN
z Heat protection fan to reduce heat in the unit.
10. POWER INPUT
z Power cord terminal (Free voltage, 100 - 240VAC, 50Hz/60Hz)