Operation Manual

User Manual
25
Chapter 6: Web Application Manager
6.1 Plug-ins download and installation
1. Open your web browser and input the IP address and web port of DVR;
2. If your computer is connected to internet, you will be prompted to download and install “ActiveX Control”;
3. You may have “Windows Security Alert” that attempts to block this with the windows Firewall. In that case, click
[Unblock] button to continue your installation processing.
4. The installation is complete; you will enter into the interface shown as Picture 6-1 and activate some ActiveX
control.
Picture 6-1
Reminder: If the plug-in program is not downloaded successfully, please check if your browser’s safety level
or firewall setting is too advanced. Also refer to section 5.2.3 Network Setup to make sure network
configuration is correct, ports are forwarded correctly, and ActiveX is enabled
Note: If you want to delete old IE webcam at DVR system update, run the command characters:
“regsvr32/u dvrocx.ocx”.
6.2 Web Client Log-in
After finishing plug-ins installation, please enter password and click [Log-in] button, and now you can view
DVR remotely through the Web Client.
Please note default password is empty. System allows Administrator to set new password as per
instructions in previous section - [Password set] menu.