Installation Guide

ManualsBrandsMOLEKULE ManualsAir purifiersAir Mini + 250 sq.ft. Air Purifier with PECO-HEPA Tri-Power Filter

Follow the steps below to connect your Molekule air purier via the mobile app for the rst time

If you have set up a device previously and need to add multiple devices, we recommend reviewing this article

Need to change or select a different WiFi network after the initial set up? Check out the step by step instructions in

this article. You can also connect your purier using a mobile hot spot by following these instructions.

Download and install the latest version of the Molekule app from the Google Play™ store or App Store

Ⓡ

How to pair and connect your

Molekule purier to WiFi

Open the Molekule app and sign

in or create a new account.

The app will prompt you to add a

device. Click on Set up device.

02 03

On the Select Device screen, tap

the purier you want to set up.

The app will then provide you with recommendations on where to place

your device and to run it 24/7. Click Next on each screen to continue.

To continue pairing, make sure you are

within

feet of your device, turn on WiFi

on your mobile phone and click

onnect.

Summary of content (4 pages)

PAGE 1
How to pair and connect your Molekule purifier to WiFi Follow the steps below to connect your Molekule air purifier via the mobile app for the first time. If you have set up a device previously and need to add multiple devices, we recommend reviewing this article. Need to change or select a different WiFi network after the initial set up? Check out the step by step instructions in this article. You can also connect your purifier using a mobile hot spot by following these instructions.
PAGE 2
How to pair and connect your Molekule purifier to WiFi On iOS, click Join when the app prompts you for "'Molekule' Wants to Join Wi-Fi Network 'Molekule'" and OK when asked "'Molekule' Would Like to Access Your Home Data’". 07 The mobile app may show a failed attempt to connect to the "Molekule" network. The app will retry automatically and may take several seconds to connect, please be patient and remain on this screen.
PAGE 3
How to pair and connect your Molekule purifier to WiFi 09 If you haven't connected to WiFi previously, the available WiFi networks will be listed. Select your preferred WiFi Network and enter password. Please wait for a few seconds as the device tries to connect to your WiFi network. 11 You have the option to name your device on the next screen. Enter a name to easily identify your Molekule air purifier. Tap Next or Skip to continue.
PAGE 4
How to pair and connect your Molekule purifier to WiFi 13 14 Set up filter auto-refills by scrolling to the bottom of the screen and tapping Activate auto-refills. Tap Remind me later to skip this step. The device mode information screen will appear. Click Done to complete setup. Minimum WiFi requirements: Additional Information Molekule devices only connect to a 2.4GHz wireless network. Note that some routers are capable of 2.4GHz but have it disabled by default.