MSDS

ManualsBrandsMoldex ManualsPaint1 gal. Power Cleaner

EnviroCare Corporation Version #2 [Revision Date: 4/2/2014]

Page 1 of 5

MATERIAL SAFETY DATA SHEET

MOLDEX

POWER

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME: MOLDEX

POWER

Product Class: General Cleaner

Product Type: Water-Based General Cleaner - Concentrate

Sold By: EnviroCare Corporation

10 Upton Drive

Wilmington, MA 01887

Telephone 24hr Emergency Assistance: Chemtrec 1-800-424-9300 (US/Canada)

Numbers: 1-703-527-3887 (Int/Maritime)

Product or Company Information: 1-978-658-0123 (Mon-Fri)

SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS

Ingredient CAS # Wt %

INGREDIENTS: This product contains no hazardous substance listed on the Massachusetts

substance list of OSHA Hazard Communication Program.

This product is non-hazardous per WHMIS criteria.

SECTION 3: HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW: The ingredients in this material are not listed as carcinogens by

IARC, NIP, OSHA, or ACGIH.

POTENTIAL HEALTH EFFECTS: Not Determined

EYES: Eye irritant

SKIN: May cause slight skin irritation

ACUTE HEALTH HAZARDS: Not determined

CHRONIC HEALTH HAZARDS: Not determined

SECTION 4: FIRST AID MEASURES

Summary of content (5 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET MOLDEX® POWER SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: MOLDEX® POWER Product Class: General Cleaner Product Type: Water-Based General Cleaner - Concentrate Sold By: EnviroCare Corporation 10 Upton Drive Wilmington, MA 01887 Telephone Numbers: 24hr Emergency Assistance: Chemtrec 1-800-424-9300 (US/Canada) 1-703-527-3887 (Int/Maritime) Product or Company Information: 1-978-658-0123 (Mon-Fri) SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient
PAGE 2
EYES: In case of eye contact, flush with water for at least 15 minutes. Get immediate medical attention. SKIN: Wash with plenty of soap and water. Get medical attention if irritation occurs and persists INGESTION: Immediately drink one cupful of water. Get medical attention. INHALATION: If breathing is affected, remove to fresh air. Get medical attention.
PAGE 3
RESPIRATORY PROTECTION: None EYE PROTECTION: When pouring liquid, wear safety glasses. SKIN PROTECTION: None OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Wear safety glasses if re-pouring this material. OSHA PEL-TWA: OSHA PEL STEL: OSHA PEL CEILING: N/A N/A N/A SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE: Pale Yellow Liquid ODOR: Slight odor PHYSICAL STATE: Pale Yellow Liquid pH AS SUPPLIED - CONCENTRATE: 7.2 BOILING POINT: 212 F (100C) FREEZING POINT: 32F (0C) SPECIFIC GRAVITY (H2O = 1): 1.0 – 1.
PAGE 4
CONDITIONS TO AVOID (STABILITY): Strong oxidizing agents INCOMPATIBILITY (MATERIAL TO AVOID): Strong oxidizing agents HAZARDOUS DECOMPOSITION OR BY-PRODUCTS: Will not occur HAZARDOUS POLYMERIZATION: Material will not polymerize CONDITIONS TO AVOID (POLYMERIZATION): N/A SECTION 11: TOXICOLOGICAL INFORMATION TOXICOLOGICAL INFORMATION: Not determined SECTION 12: ECOLOGICAL INFORMATION ECOLOGICAL INFORMATION: Not determined SECTION 13: DISPOSAL CONSIDERATIONS WASTE DISPOSAL METHOD: Follow Local, State and F
PAGE 5
CANADA: This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required by the Controlled Products Regulations. SECTION 16: OTHER INFORMATION OTHER INFORMATION: The information contained herein is based on data believed by this company to be accurate. We do not assume any liability for its accuracy. We neither suggest nor guarantee that any hazards mentioned are the only ones which exist.