Installation Guide

Y2618BN 18 Towel Bar
Brushed Nickel Finish
Y2624BN 24 Towel Bar
Brushed Nickel Finish
Y2618BRB 18 Towel Bar
Mediterranean Bronze Finish
Y2624BRB 24 Towel Bar
Mediterranean Bronze Finish
Y2618CH 18 Towel Bar
Chrome Finish
Y2624CH 24 Towel Bar
Chrome Finish
Y2622BRB 24 Double
Towel Bar
Mediterranean Bronze Finish
Y2622CH 24 Double Towel
Bar
Chrome Finish
25300 AL MOEN D R I VE NOR TH OLMSTED, OH 44070
C ORPOR ATE H EADQU AR TERS: (800) 321 -8809 F AX: (800) 848-6636
I NTER N ATI ONAL: (440) 962 -2000 F AX: (440) 962 -2726
C USTOMER SERVI C E (USA): 800 -882-0116 F AX: (888) 379-2720
W WW. MOEN .C OM
Copyright Creative Specialties International Literature # BA1442
Towel Bar post is die cast from
highest quality zinc alloy (Zamac).
Casting is plated Chrome, Brushed
Nickel or Mediterranean Bronze.
Towel Bar is aluminum for Brushed
Nickel and Chrome finishes and
stainless steel for Mediterranean
Bronze.
Cleaning Instructions:
1. Position the mounting template on the wall in the desired location.
2. Using a level, align the template and tape it to the wall.
3. Drill two 5/16 holes at each mounting plate location that
corresponds to your product.
4. We recommend using the horizontal holes for drywall installation.
5. Remove the template from the wall.
6. Fold ends of the plastic toggle together and insert into each hole
in the wall.
7. Lightly tap anchors until flush with the wall.
8. One at a time, insert plastic pin into each of the anchors and
lightly tap to activate anchor.
9. Remove pin and repeat on all anchors.
10. One at a time, place each mounting plate over anchors (notch
facing downward) and insert screws through plate into anchors.
11. Tighten screws.
12. Assemble the Towel Bar and posts.
13. While assembled, position each end post with setscrews facing
down and place over both mounting plates. Tighten the
setscrews.
Stock Number:______________________Towel Bar
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
18& 24Towel Bars
Y2618 & Y2624
Banbury® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.