Specifications DESCRIPTION • • • • • Various finishes identified by suffix Handheld shower 69" double interlock spiral hose (metal) Vacuum breaker 30" slide bar with push button height selection OPERATION • • Single function Handshower holder rotates to adjust angle of handshower FLOW • Designed to deliver 1.75 gpm (6.6 L/min) at 80 psi STANDARDS • Designed and manufactured to comply with the applicable requirements of CSA B-125.1, ASME A112.18.
S p e c i f i c a t i o n s DESCRIPTION • • Metal construction with various finishes identified by suffix Includes 9” rainshower showerhead, arm, flange and diverter tub spout OPERATION • • • Handle operates counterclockwise through a 270° arc with off at 6 o’clock and maximum hot at the 9 o’clock position.
Specifications DESCRIPTION • • Metal construction with various finishes identified by suffix For use with S3600 3/4" volume control valve OPERATION • Lever style handle operation STANDARDS • Third party certified to meet ASME A112.18.1/CSA B125.
S p e c i f i c a t i o n s DESCRIPTION • • Single function spray with various finishes identified by suffix Immersion technology OPERATION • Spray face tilts 20 degrees in any direction FLOW • Designed to deliver 2.0 gpm max (7.6 L/min) at 80 psi STANDARDS • Third party certified to ASME A112.18.1/ CSA B125.
Specifications DESCRIPTION • Metal construction with chrome plated, antique nickel, antique bronze, LifeShine® brushed bronze, LifeShine® brushed nickel, LifeShine® hammered nickel, nickel, oil rubbed bronze, LifeShine® polished brass, platinum, pewter, LifeShine® satine, glacier or wrought iron finishes WARRANTY • Warranted for one year against material or manufacturing defects DROP ELL Models: A725, A725AN, A725AZ, A725BB, A725BN, A725HN, A725NL, A725ORB, A725P, A725PM, A725PW, A725ST, A725W, A725WR Fin
Specifications DESCRIPTION • • • Brass construction 1/2" CC, IPS, or PEX connections with 1/4 turn stops Pressure balancing, four port, cycle valve • Adjustable temperature limit stop to control maximum hot water temperature Pressure balancing mechanism maintain selected discharge temperature to ± 3°F OPERATION • CARTRIDGE • • • 1222 cartridge design Nonmetallic/nonferrous and stainless steel materials Accommodates back to back installations • Third party certified to meet CSA B125.1, ASME A112.18.
S p e c i f i c a t i o n s DESCRIPTION • Brass construction • 3/4" IPS connections • 13 gpm @ 60 psi OPERATION • Flow lever operates counterclockwise through a 90˚ arc with off at 6 o’clock and maximum flow at the 3 o’clock position. Shut off in clockwise direction CARTRIDGE • Ceramic disc cartridge design INSTALLATION • Volume control valve must be installed with the arrow pointing in the water flow direction STANDARDS • Third party certified to meet CSA B-125.1, ASME A112.18.
Specifications DESCRIPTION • • • Metal construction 1/2" CC and IPS connections Includes mounting bracket and test plug STANDARDS • Third party certified to ASME A112.18.1/ CSA B125.1, and all applicable requirements referenced therein WARRANTY • Lifetime limited warranty against leaks to the original consumer purchaser • 5 year warranty if used in commercial installations Body Spray Rough-In Model: S1300 3-1/4" ± 3/8" (82mm ± 10mm) CONNECTOR TO FINISHED WALL 8-1/2" (216mm) 1/2" CC/NPT DIA.
