Specifications

METHOD
™
Single-Handle Lavatory Faucet
Models: 6810 with metal waste assembly
66810 with 50/50 waste assembly
NOTE: THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 1 HOLE, 1-1/8" MIN. DIA.
* USE A2020 EXTENSION KIT FOR VESSEL
SINK APPLICATIONS
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes metal or 50/50 waste assembly where noted
• Includes optional 3 hole deck plate (escutcheon)
• Flexible supplies with 3/8” compression fittings
OPERATION
• Temperature controlled by 100° arc of handle travel
FLOW
• Aerator is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1 and all
applicable requirements referenced therein including NSF61/9
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
•
ADA
for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
25”
(635mm)
2-1/2"
(64mm)
MAX.
Back
Splash
2-1/2" min
for lift rod
operation
**5" (127mm)
Vessel Extension x2
20"
(508mm)
13-1/4" (337mm)
OPEN POSITION
OPTIONAL ESCUTCHEON
6" x 2-1/8"
(152mm) x (54mm)
1/8"
(5mm)
2"
(51mm)
3-1/2”
(89mm)
4-1/4”
(108mm)
8-1/4”
(210mm)