Technical Specifications

1 ½” Grab Bar
rods
are formed from
18–gauge (.049) type 304 stainless
steel tubing with a satin or white powder
coated finish.
q
8912
–
12” Grab Bar
Satin Finish
1 ½” Bar, Concealed Screw Mounting
q R8918, R8918W – 18” Grab Bar
Satin or White Finish
1 ½” Bar, Concealed Screw Mounting
q R8924, R8924W – 24” Grab Bar
Satin or White Finish
1 ½” Bar, Concealed Screw Mounting
q DN8930, 8930W – 30” Grab Bar
Satin or White Finish
1 ½” Bar, Concealed Screw Mounting
q 8932 – 32” Grab Bar
Satin Finish
1 ½” Bar, Concealed Screw Mounting
q R8936, R8936W – 36” Grab Bar
Satin or White Finish
1 ½” Bar, Concealed Screw Mounting
q 8942, R8942W – 42” Grab Bar
Satin or White Finish
1 ½” Bar, Concealed Screw Mounting
q DN8948 – 48” Grab Bar
Satin Finish
1 ½” Bar, Concealed Screw Mounting
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 [phone] •
FAX: [phone] • INTERNATIONAL: (440) 962- 2000 •
FAX: (440) 962
-
2726 CUSTOMER SERVICE (USA): 800
-
882
-
0116
1. Position unit on wall in desired location.
2. Mark mounting holes.
3. Drill starter holes.
4. Mount unit on wall using 2 ¼” screws (provided).
5. Snap flange covers into place.
Note: Wood blocking is preferable behind all wall surfaces. If
wood blocking is not available, the following optional fasteners are
suggested: Tile/Masonry – Plastic or Lead Anchors;
Plaster/Drywall – Toggle Bolts.
Stock Number:
____________________1 ½” Grab Bars
By CSI Bath Furnishings
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
1 ½” Grab Bars – Concealed Screw
8900
Home Care Technical Specification

Copyright CSI Bath Furnishing Division of Moen 02/22/01
A B C
8912
12" 8.375 15.5
8918
18" 14.375 21.5
8924
24" 20.375 27.5
8930
30" 26.375 33.5
8932
32" 28.375 35.5
8936
36" 32.375 39.5
8942
42" 38.375 45.5
8948
48" 44.375 51.5