Owner Manual

If you have the LifeShine finish on your new faucet, you have Moen’s guarantee

that your ﬁnish will not tarnish, corrode or discolor. The LifeShine finishes include

Polished Nickel, Polished Brass, Classic Stainless and Brushed Nickel.

Caring for the LifeShine non-tarnish finish.

The LifeShine finish can be cleaned with most household

cleaners (including mild abrasives) when used according to

their manufacturers’ instructions for use.

However, all cleaners should be rinsed off thoroughly with

water immediately after cleaning your faucet. Avoid using

any cleansers (e.g., lime scale removers) or pads/sponges

that are unsafe for polished metallic surfaces.

Caution: Do not use pads or sponges that are not speciﬁcally recommended for

cleaning polished surfaces.

Many pads or sponges with green, ﬁbrous surfaces (such as heavy-duty scrub

sponges) contain microscopic mineral particles, which can scratch nearly all

polished surfaces, including the LifeShine faucet ﬁnish.

To remove water spots, 0000 grade steel wool may be used. Moen suggests the

periodic application of a quality, non-abrasive wax, such as car wax or furniture wax,

especially for matte or textured ﬁnishes (e.g., Stainless or Brushed Nickel). Failure to

comply with these cleaning instructions may void Moen’s warranty.

Care and cleaning of

Moen

LifeShine

faucet ﬁnish.