Two-Handle Lavatory Faucet Specifications

CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
Rev. 6/08
2-3/8”
(60mm)
3-5/8”
(92mm)
4“
(101mm)
5“
(127mm)
3-1/2”
(89mm)
5-3/8”
(136mm)
HOT
1/2" NPT
COLD
1/2" NPT
LIFT ROD
MOUNTING
NUT/WASHER
1-3/4" (45mm) MAX.
DECK THICKNESS
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
- Metal construction with various finishes identified by suffix
- 1/2”IPS connections will accept standard ball nose connection for 3/8”tubing
- Includes metal pop-up waste assembly
- Designed to be installed through 3, 1” min. dia. holes on 4” centers
OPERATION
- Lever style handles
- Maximum handle rotation angle is 90° to full on for either handle
- Rotate hot side handle counterclockwise to open and clockwise to close
- Rotate cold side handle clockwise to open and counterclockwise to close
FLOW
- Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max. (8.3 L/min)
- Features a laminar flow pattern for dramatic water presentation
CARTRIDGE
- 1224 cartridge design
- Nonmetallic/nonferrous and stainless steel materials
STANDARDS
- Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1, ICC A117.1
and all applicable requirements referenced therein
- Certified to ANSI/NSF 61/9
- Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
- ADA for lever handle
WARRANTY
- Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
- 5 year warranty if used in commercial installations
Felicity™
Two-Handle Lavatory Faucet
Models: S442 series