Specification

Two-Handle Widespread
Lavatory Faucet
4"
(101mm)
8"
(203mm)
2-7/8"
(73mm)
ESCUTCHEON
2-1/8"
(53mm)
5-1/2"
(139mm)
4-1/4"
(107mm)
LIFT
ROD
2-3/4"
(70mm)
DESCRIPTION
• Metal construction with Chrome plated or Classic Brushed
Nickel finish
• 1/2" IPS shanks
• Designed to be installed on 8" to 16" centers
• Supplied with vandal resistant screws and metal pop-up waste
assembly or metal grid where indicated
OPERATION
• Lever style handles with hot and cold color indicators
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Aerator is limited to 1.5 gpm max (5.7 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to Watersense® (only applies to 1.5 gpm),
ASME A112.18.1/CSA B125.1 and all applicable requirements
referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal
Safe Drinking Water Act
• ADA for lever handles
WARRANTY
• Warranted for 5 years against material or manufacturing defects
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
www.moen.com
Rev. 10/12
C O M M E R C I A L
See table above
NOTE: Spout designed to be installed through 1"
min. dia. hole, valves install through 1-1/8" min.
dia. hole
MODEL FLOW (gpm) DRAIN FINISH
WATERSENSE
CERTIFIED
8922 1.5 Metal Chrome x
8922CBN 1.5 Metal CBN x
8924 1.5 Grid Chrome x
CBN-Classic Brushed Nickel