Dimensions Guide
Two-Handle Widespread
Lavatory Faucet
MODEL
FLOW (gpm)
DRAIN
FINISH
WATERSENSE
CERTIFIED
8922
1.2
Metal
Chrome
x
8922CBN
1.2
Metal
CBN
x
8924
1.2
Grid
Chrome
x
4"
(101mm)
8"
(203mm)
5-1/2"
(139mm)
4-1/4"
(107mm)
2-7/8"
(73mm)
ESCUTCHEON
2-1/8"
(53mm)
2-3/4"
(70mm)
Lift
Rod
Max Deck Thickness
1-1/4" (32mm)
4" (102mm) -
8" (203mm)
2-1/2"
(64mm)
DESCRIPTION
• Metal construction with Chrome plated or Classic Brushed
Nickel finish
• 1/2" IPS shanks
• Designed to be installed on 8" to 16" centers
• Supplied with vandal resistant screws and metal pop-up waste
assembly or metal grid where indicated
OPERATION
• Lever style handles with hot and cold color indicators
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Water usage is limited to these maximum flow rates as indicated
by the corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA
B125.1, and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California
water efficiency regulations
• Complies with California Proposition 65 and with the Federal
Safe Drinking Water Act
• ADA for lever handles
WARRANTY
• Warranted for 5 years against material or manufacturing defects
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
www.moen.com
Rev. 1/16
C O M M E R C I A L
See table above
NOTE: Spout designed to be installed through 1"
min. dia. hole, valves install through 1-1/8" min.
dia. hole
CBN-Classic Brushed Nickel