Instruction Sheet

ManualsBrandsMoen ManualsPlumbingGenta LX Collection Chrome One-Handle Pulldown Kitchen Faucet in Chrome Color

INS11736 - 8/21

Adjustable Pliers

Alicate ajustable

Pinces réglables

Safety Glasses

Gafas de seguridad

Lunettes de sécurité

Adjustable Wrench

Llave ajustable

Clé anglaise

Sealant

Sellador

Mastic

Phillips Screwdriver

Destornillador Phillips

Tournevis Phillips

Thread Seal Tape

Cinta para sellar

roscas

Ruban pour joints

ﬁletés

Flathead Screwdriver

Destornillador de punta chata

Tournevis à tête plate

Tape Measure

Cinta métrica

Mètre à ruban

Required for Optional Hardwire Installation

Necesario para la instalación optativa del cableado permanente

Requis pour l’installation câblée optionnelle

SINGLE HANDLE PULLDOWN KITCHEN FAUCET

MEZCLADORA MONOMANDO EXTENSIBLE

PARA COCINA

ROBINET DE CUISINE À BEC RÉTRACTABLE

ET POIGNÉE UNIQUE

Regístrese en línea:

S’enregistrer en ligne :

www.moen.com/product-registration

Record Purchased Model Number:

Registro del número de modelo comprado:

Consigner ici le numéro du modèle acheté :

_______________________

(Save instruction sheet for future reference)

(Guarde la hoja de instrucciones para futura referencia)

(Garder ces directives pour référence ultérieure)

Image is for reference only

(Style varies by model)

La imagen es sólo como referencia

(El estilo varía por el modelo)

Cette image n'est offerte qu'à titre indicatif seulement

(Le style varie selon le modèle)

PLEASE CONTACT MOEN FIRST

For Installation Help, Missing or Replacement Parts

(USA) 1-800-BUY-MOEN (1-800-289-6636) www.moen.com

(Canada) 1-800-465-6130 www.moen.ca

POR FAVOR, CONTÁCTESE PRIMERO CON MOEN

Para obtener ayuda de instalación, piezas faltantes o de

recambio

(Costa Este) 011 52 (800) 718-4345 www.moen.com.mx

VEUILLEZ D’ABORD CONTACTER MOEN

En cas de problèmes avec l’installation, ou pour obtenir

toute pièce manquante ou de rechange

(Canada) 1-800-465-6130 www.moen.ca

HELPFUL TOOLS

For safety and ease of faucet replacement, Moen

recommends the use of these helpful tools.

HERRAMIENTAS ÚTILES

Para que el cambio de la llave sea fácil y seguro, Moen le

recomienda usar estas útiles herramientas.

OUTILS UTILES

Par mesure de sécurité et pour faciliter l’installation, Moen

suggère l’utilisation des outils suivants.

Summary of content (12 pages)

PAGE 1
INS11736 - 8/21 PLEASE CONTACT MOEN FIRST For Installation Help, Missing or Replacement Parts (USA) 1-800-BUY-MOEN (1-800-289-6636) www.moen.com SINGLE HANDLE PULLDOWN KITCHEN FAUCET MEZCLADORA MONOMANDO EXTENSIBLE PARA COCINA ROBINET DE CUISINE À BEC RÉTRACTABLE (Canada) 1-800-465-6130 www.moen.ca POR FAVOR, CONTÁCTESE PRIMERO CON MOEN Para obtener ayuda de instalación, piezas faltantes o de recambio (Costa Este) 011 52 (800) 718-4345 www.moen.com.
PAGE 2
Parts List A. Faucet Body H J B. Escutcheon J1. Pulldown Hose Weight Indicator Mark C. Deck Gasket K. Outlet Hose D. Installation Tool L. Supply Hose Hot E. Support Bracket M. Supply Hose Cold F. Mounting Bracket Nut N. Deck Plate G. Spray Wand O. Deck Plate Gasket H. Hose Weight I. Hose Protector J. Pulldown Hose D A Liste des pièces A. Faucet Body G B C I L E F N K C. Deck Gasket K. Outlet Hose D. Installation Tool L. Supply Hose Hot E. Support Bracket M. Supply Hose Cold F.
PAGE 3
INS11736 - 8/21 1A 1B or o ou A B A N C O N For Single Hole Applications: 1 1. Place Deck Plate Gasket (O) onto Deck Plate (N). 2. Firmly snap Deck Plate Gasket (O) onto Deck Plate (N). 1. Place Escutcheon (B) and Deck Gasket (C) onto base of Faucet Body (A) and place into sink hole. 3. Flip Deck Plate (N) over and place onto Mounting surface and install Faucet Body (A) in hole on sink. NOTE: Install with handle on right side only For Single Hole Applications: 1.
PAGE 4
2 3 A F E D F 1 D 1 2 1. Hand tighten Mounting Nut (F) with Installation Tool (D). 1. Slide Mounting Washer (E) up onto Faucet Body (A) under sink. 2. Use screwdriver though hole in Installation Tool (D) to tighten firmly. 2. Install Mounting Nut (F). 1. Slide Mounting Washer (E) up onto Faucet Body (A) under sink. 2. Install Mounting Nut (F). 1. Hand tighten Mounting Nut (F) with Installation Tool (D). 1. Slide Mounting Washer (E) up onto Faucet Body (A) under sink. 2.
PAGE 5
INS11736 - 8/21 4 5 M L M L I 1 2 2 1. Install Hose Protector (I) finger tight. 1. Attach Flexible lines (L and M) to shutoff valves. 1. Install Hose Protector (I) finger tight. 2. Tighten with wrench until secure. 1. Install Hose Protector (I) finger tight. 1. Attach Flexible lines (L and M) to shutoff valves. 2. Tighten with wrench until secure. 1. Attach Flexible lines (L and M) to shutoff valves. 2. Tighten with wrench until secure.
PAGE 6
7 A L 2 H H 2 H 1 L 1 1. Insert small end of Pulldown Hose (H) into spout and feed through Faucet Body (A). H 1. Remove and discard plastic cap from end of Pullout Hose (H). 2. Insert hose into Quick Connect Adapter (L). 3. Push until a “click” is heard. Tug Downward to test engagement. 1. Insert small end of Pulldown Hose (H) into spout and feed through Faucet Body (A). 1. Remove and discard plastic cap from end of Pullout Hose (H). 1.
PAGE 7
INS11736 - 8/21 8 J1 9 J M L Install zone Zona de instalacion Zone d’installation H 1. Turn on Hot (L) and Cold (M) water supply. IMPORTANT - Locate Hose Weight Locator Mark (J1) on Pulldown Hose (J). Install Hose Weight (F) just above of loop curvature in hose on same side of hose as locator mark. Adjustable pliers may be useful to securely clamp Hose Weight (H). 1. Turn on Hot (L) and Cold (M) water supply. 1. Turn on Hot (L) and Cold (M) water supply.
PAGE 8
ATTENTION / ATENCIÓN / MISE EN GARDE For the best performance of your new pulldown faucet, Moen recommends the following: • Maintain 8"x8" clear area for the hose and weight to travel, free of any moveable items including (bottles, cleaning supplies, etc.). See Illustration. • If non-moveable pipes or other fixtures are interfering, consider repositioning the weight higher on the hose. • Periodically check to be sure no obstructions have entered this clear zone.
PAGE 9
INS11736 - 8/21 11 12 J J 3 X G 2 G 1 1. Remove protective cap from Spray Wand (G). 1. Tighten Pulldown Hose (J), flush with Spray Wand (G). Do not overtighten. 2. Attach Spray Wand (G) to Pulldown Hose (J). 3. Finger tighten. 1. Tighten Pulldown Hose (J), flush with Spray Wand (G). Do not overtighten. 1. Remove protective cap from Spray Wand (G). 1. Tighten Pulldown Hose (J), flush with Spray Wand (G). Do not overtighten. 2. Attach Spray Wand (G) to Pulldown Hose (J). 3. Finger tighten. 1.
PAGE 10
13 Spray Wand with Powerboost™ / Varilla del rociador con PowerBoost™ / Bec pulvérisateur avec PowerBoostMC Stream Mode Modo de chorro Mode jet aéré Enable PowerBoost™ modes Active los modos PowerBoostTM Activer les modes PowerBoostMC Boosted Stream Chorro aumentado Jet plus puissant D A Spray Mode Modo de rociado Mode pulvérisation Boosted Spray Rocio aumentado Pulvérisation plus puissante To disengage PowerBoost™: Turn water off. Para desenganchar el PowerBoostTM: Cierre el agua.
PAGE 11
INS11736 - 8/21 14 15 J J G 1 2 1. Rinse debris from screen. 1. Unscrew Pulldown Hose (J) from Spray Wand (G) and remove screen and o-ring. 1. Enjuaque los residuos del filtro. 1. Unscrew Pulldown Hose (J) from Spray Wand (G) and remove screen and o-ring. 1. Rincer le filtre pour en retirer tous le debris. 1. Unscrew Pulldown Hose (J) from Spray Wand (G) and remove screen and o-ring. 16 17 J G 1 2 1. Re-check water flow. 1. Renistall screen and o-ring as shown.
PAGE 12
Moen Limited Lifetime Warranty Moen products have been manufactured under the highest standards of quality and workmanship. Moen warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home (the “Warranty Period" for homeowners), that this product will be leakand drip-free during normal use and all parts and finishes of this product will be free from defects in material and manufacturing workmanship.