Specification Sheet

ALIGN™
Single Handle Single Hole Mount
High Arc Kitchen Faucet
Models: 7165 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 2 HOLES:
A 1-1/2" (38MM) DIA.
S p e c i fi c at i o n s
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• High arc spout provides the height and reach to fill or clean large pots
• Flexible supply lines with 3/8" compression fittings
• 360˚ rotating spout provides ability to install handle on either side
• Faucet designed for handle to be mounted on right side
OPERATION
• Single handle lever
• Temperature controlled by 100˚ arc of handle travel
FLOW
• Spout flow is limited to 1.5 gpm (5.7 L/min) max at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein including NSF 61/9G
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
4/13
10-1/4" x 2-3/8"
(260mm x 60mm)
ESCUTCHEON
2-1/2" (63mm)
MAX DECK
THICKNESS
9-5/8"
(244mm)
8"
(203mm)
15-5/16"
(389mm)
2"
(51mm)
4-11/16"
(119mm)
2-5/16"
(58mm)
1-1/4" (32mm)
THRU HOLE
1-1/2" (38mm)
THRU HOLE
6-15/16 "
(176mm)
4-13/16"
(122mm)
3-1/2"
(89mm)
3-1/2"
(89mm)
7/8"
(19mm)
1-1/16"
(27mm)
2-1/16"
(52mm)
30-5/8"
(778mm)