Specification
6-15/16 "
(176mm)
13-3/4"
(349mm)
4-13/16"
(122mm)
3-1/2"
(89mm)
6-7/8"
(175mm)
2-1/2" (63mm)
Max Deck Thickness
3-1/2"
(89mm)
7/8"
(19mm)
1-1/16"
(27mm)
6-3/4"
(171mm)
2-1/16"
(52mm)
30-5/8"
(778mm)
ALIGN™
Single Handle High Arc
Pulldown Prep/Bar Faucet
Models: 5965 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THROUGH 1 HOLE, 11/2” 38mm MIN. DIA.
OPTIONAL 3HOLE ESCUTCHEON 141002 AVAILABLE
Specifications
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Reflex™ pulldown system offers smooth operation, easy movement
and secure docking
• Power Clean™ spray technology
• Metal construction with various finishes identified by suffix
• Duralock™ quick connect
• Pulldown spray with 68” braided hose
• Flexible supply lines with 3/8” compression fittings
• High arc spout provides the perfect height and reach for prep sinks while the
pulldown feature provides maneuverability for food preparation tasks
• 360˚ rotating spout provides ability to install handle on either side
• Faucet designed for handle to be mounted on right side
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) max at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein including NSF 61/9G & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
• ADA
for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
CRITICAL DIMENSIONS
DO NOT SCALE
Rev. 3/17
There is more than 1 version of this model.
Page down to identify the version you have.