Specification

CRITICAL DIMENSIONS

(DO NOT SCALE)

FINISHED

WALL LINE

Max thickness:

2” if mounting into a stud

1-1/4” if mounting

w/toggle bolts

30-5/8"

(778mm)

Hole Size

5/8" (17mm)

1-1/2" (39mm)

S p e c i f i c a t i o n s

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

Rev. 6/15

Single Function Handshower

with Slidebar

Models: 3869 series

DESCRIPTION

• Various finishes identified by suffix

• Handheld shower

• 69" double interlock spiral hose (metal)

• Double check valve in handshower

is included with models after May 1, 2014

• 30" slide bar with push button height selection

OPERATION

• Single function

• Handshower holder rotates to adjust angle of handshower

FLOW

• Designed to deliver 2.5 gpm (9.5 L/min) at 80 psi

• EP suffix models are limited to 2.0 gpm (7.6 L/min) at 80 psi

STANDARDS

• Designed and manufactured to meet ASME A112.18.1/CSA B-125.1,

ASSE 1014 and all applicable specifications referenced therein

WARRANTY

• Limited lifetime warranty against material or manufacturing defects

There is more than 1 version of this model.

Page down to identify the version you have.

PAGE 1
S p e c i f i c a t i o n s There is more than 1 version of this model. Page down to identify the version you have. DESCRIPTION • • • • • Various finishes identified by suffix Handheld shower 69" double interlock spiral hose (metal) Double check valve in handshower is included with models after May 1, 2014 30" slide bar with push button height selection OPERATION • • Single function Handshower holder rotates to adjust angle of handshower FLOW • • Designed to deliver 2.5 gpm (9.
PAGE 2
S p e c i f i c a t i o n s DESCRIPTION • • • • • Various finishes identified by suffix Handheld shower 69" double interlock spiral hose (metal) Vacuum breaker 30" slide bar with push button height selection OPERATION • • Single function Handshower holder rotates to adjust angle of handshower FLOW • • Designed to deliver 2.5 gpm (9.5 L/min) at 80 psi EP suffix models are limited to 1.75 gpm (6.7 L/min) at 80 psi STANDARDS • • Designed and manufactured to meet ASME A112.18.1/CSA B-125.