Specification Sheet

MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
CRITICAL DIMENSIONS
(DO NOT SCALE)
CRITICAL DIMENSIONS
(DO NOT SCALE)
SINK DESCRIPTION
• Manufactured of 18 gauge stainless steel
• The bowls are a minimum of 14” x 16” x 11”
• The sink ledge has four fixture mounting holes, 1-1/2” in diameter
and 4” on center
• Has two 3-1/2” diameter recessed drain opening
• Soundshield undercoating maximizes sound deadening
and inhibits condensation
• Made in USA
• Includes QuickMount™ installation hardware
CUT OUT DIMENSIONS
• Cut out dimensions are 32-3/8” x 21-3/8”, with a 3/8” corner radius.
A tolerance of plus or minus 1/16” is acceptable
STANDARDS
• Third party certified to ASME A112.19.3M/CSA B45.4
and all applicable specifications referenced therein
WARRANTY
• Lifetime limited warranty to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
• Visit www.moen.com/customer-support/warranty for complete details and
limitations
12/16
Double Bowl Kitchen Sink
Model: 22121Q
11"
(278mm)
BOWL
DEPTH
22"
(559mm)
WIDTH
1-7/8"
(48mm)
16"
(406mm)
BOWL
4"
(51mm)
4"
(51mm)
33"
(838mm) LENGTH
4-1/8"
(105mm)
2" R. TYP.
1-1/2" DIA. TYP.
8-7/8"
(225mm)
9-7/8"
(251mm)
3-1/2"
DIA. TYP.
3-1/2"
DIA. TYP.
17"
(432mm)
2-1/2"
(64mm)
3/8"
R. TYP.
1-7/8"
(48mm)
14"
(356mm)
1-1/4"
7"
(178mm)
28"
(711mm)
Installation Detail
COUNTERTOP
UNDERCOAT
SINK
CLAMP
BOWL
DIMENSION
CONTINUOUS
“V” CHANNEL
SEALANT MATERIAL
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
COMMERCIAL