CONTENTS: 1. Safety Prec Page 2 2. Fan Structure Drawing …………………….…................. Page 3 3. Installa of Hanging Bracket .............................. Page 4 4. Installa Downrod / Hanger Ball ................... Page 5 5. Hanging of Ceiling Fan ........................................... Page 6 6. Wiring of Ceiling Fan............................................... Page 7 7. Installa y ............................................ Page 8 8. Installa an Blades …………………………………… Page 8 9.
fig 14 fig 14 fig 14 fig 15 Attach the lamp cover to the lightkit and twist clockwise until its secured tightly.(fig 15) fig 15 DECORATIVE COVER *If the fan is withlight, please ignore this step Attach the no light decorative cover to the motor shaft and twist clockwise until it’s secured tightly.
FAN STRUCTURE DRAWING: *Please choose one way to install the Blades 1. The fan with lightkit: Attach the blade to the motor, and tighten the two screws firmly. (fig 12) Repeat the steps 1 to install all the three blades and tighten all the screws firmly. fig 12 2. The fan without lightkit: Attach the blade to the motor, then attach the Blade decorative cover to the Blade and tighten the two screws firmly. (fig 13) Repeat the steps 1 to install all the three blades and tighten all the screws firmly.
INSTALLATION OF HANGING BRACKET: WIRING OF CEILING FAN: fig 9 fig 10 Total three groups wires from the top of the motor: *white, blue wires with small connector -for lightkit(Only for the fan with light) *Black(L1),Red(L2),Brown(L3) wires with big connector-live wire for fan *Green/Yellow-ground wire Plug the connector from the motor into the remote control receiver: big Connector to the big Socket & small Connector to the small Socket (Do not connect the small connector for fan without lightkit) 7 4
INSTALLATION OF DOWNROD / HANGER BALL: 5 HANGING OF CEILING FAN: 6