Instructions / Assembly
Wire
strippers
Ladder
Safety
glasses
Electrical
tape
Phillips
screwdriver
PliersFlat blade
screwdriver
CAUTION
◆ Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have
resulted during shipping. If there is a defect
in the wire, do not attempt installation.
◆ Before starting installation of this fixture or
removal of a previous fixture, disconnect the
power by turning off the circuit breaker or by
removing the fuse at the fuse box.
Bulbs
(not included)
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED
EXPLODED PARTS INSTALLATION
STEP 2
Attach the iron rack B onto
bracket A using screws.
STEP 3
Attach the bracket B onto
iron rack B using ball nut B.
HARDWARE INCLUDED
Fixture
Mounting Unit
Mounting Screws
Wire Nuts
Fixture
Iron Rack B
Iron Rack B
Iron Rack B
Bracket A
Bracket A
Screws
Screws
Screws
Bracket B
Bracket B
Bracket B
Iron Rack A
Iron Rack A
Ball Nuts B
Ball Nuts B
Ball Nuts B
Stem E
Stem D
Stem E
Ball Nuts A
Ball Nuts A
Mounting UnitCover
Cover
Decorative
Nut
Decorative Nut
Stems(A~D)
Canopy
Canopy
Mounting
Screws
Wire Nuts
Stem C
Stem B
Stem A
1
2
STEP 1
Unscrew the ball nuts A from the mounting unit.
Use the mounting screws to attach the
mounting unit to the junction box.