TipTop Installation Instructions Compatible with works with the Google Assistant
Please read and save these instructions before installation
02 02 General Inquiries For all questions about your ceiling fan please read all included instructions, installation procedures, troubleshooting guidelines and warranty information before starting installation Fan Support For fast service have the following information below when you call: For missing parts or general inquiries call our trained technical staff at: • • • 1-866-810-6615 1-866-810-6615 option 0 Mo de l Name and Numbe r Part Numbe r and Part D e sc ri pti o n D ate Of Purc hase and Pu
02 Safety Rules For operation, maintenance, and troubleshooting information, visit http://modernforms.com/fan-support/ To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker before beginning. All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70” and local electrical codes. Electrical installation should be performed by a licensed electrician. The fan must be mounted with a minimum of 7 ft. (2.
02 WARNING: Do not install or use your fan if any part(s) is/are damaged or missing. This product is designed for use only with the supplied parts and/or accessories designated for use with this product by Modern Forms. Substitution of parts or accessories not designated for use with this product by Modern Forms could result in personal injury or property damage and will void the warranty. Contact an authorized dealer or the manufacturer if any parts are damaged or missing.
02 Get Smart All Modern Forms Smart Fans are: WET DC MOTOR Durably finished and rated for interior and exterior use Wet location-listed to the strictest UL/cUL safety regulations Coordinate with smart devices for voice-activated control Quiet, reliable, and up to 70% more efficient than AC fans Wi-Fi and Bluetooth enabled for flexible control Compatible with our free Modern Forms app The Modern Forms app integrates seamlessly with smart home devices you already own.
4 Table of Contents Package Contents 5 9. Mounting Options 5 10. Installing the Mounting Bracket 6 10. Attaching the Fan Blades 7 11. Adding the Decorative Trim Ring 8 12. Hanging the Fan 9 13. Making the Electrical Connections 10 14. Installing the Wall Control 11 15. Finishing the Installation 11 17. Installing the Trim Ring 17. 12 Installing the Adapter Plate 18. 13 Installing the LED Module 14 19. Controlling the Fan 15 21. Factory Reset 16 24.
03 Tools & Materials Required Phillips screwdriver Step ladder Wire cutters Electrical tape HANGING WEIGHT: 17 lbs NOTE: Before discarding packaging materials, be certain all parts have been removed. NOTE: Place the parts from the hardware bag into a small container to keep them from being lost. MAC ID IMPORTANT: Please make note of the MAC ID on the receiver and keep it in a safe place.
Package Contents 1 Mounting Bracket 2 3 RPL-F2004-HGR 6 4 Adapter Plate 8 Decorative Trim Ring Fan Blade RPL-F2004-***-BD-** 5 Motor Housing RPL-F2004-GLA 10 9 LED Module F3IN-120V-R1-30 Remote Control F-RCBT-WT PC Shade RPL-F2004-TRIM-** 7 04 Receiver F-R3-2004-*** Hardware Bag RPL-F2004-PARTS Safety Cable 6.5” x 19 x 2mm Flat washer (1pcs) Safety Cable 10 x 76mm Pan head Phillips wood screws (1pc) Safety Cable 5.2 x 8.
05 Mounting Options 1 Installing The Mounting Bracket 2 Standard Ceiling Caution: To prevent electrical shock, ensure electricity has been turned off at the circuit breaker before beginning. 10 CAUTION: To prevent electrical shock, ensure electricity has been turned off at the circuit breaker before beginning. 1. Remove 1 set screw from mounting bracket and set aside for use in Finishing the Installation. Mount to the outlet box as shown above. 2.
Attaching the Fan Blades 3 06 1. Place blade on motor and secure with the blade attachment, screws and washers. 2. Insert blades in slots, aligning with motor assembly holes. 3. Secure blades with blade attachment screws & washers. 4. Remove set screws from motor housing, install blade collector ring (when applicable), and re-install screws.
07 Adding the Decorative Trim Ring 4 1. Remove three screws from the top of the motor housing and place the decorative trim ring on the body of fan housing as shown. 12 5 2. Reattach the motor housing by re-installing the three screws.
Hanging the Fan 6 08 1. Remove 2 opposing screws and loosen the others. 2. Pass supply wires through mounting plate. 3. Lift motor assemby and hang it on the hook on the mounting plate using one of the screw holes.
09 Making the Electrical Connections 7 1. Connect the wires from fan to the corresponding wires on the receiver. OUTLET BOX BLACK (HOT) BLACK (“AC IN L”) RECEIVER RED (TO MOTOR) GRAY (TO MOTOR) YELLOW (TO MOTOR) YELLOW (MOTOR) GRAY (MOTOR) RED (MOTOR) 14 WHITE (NEUTRAL) GREEN (GROUND) WHITE (“AC IN N”) GREEN (GROUND) TO HANGER BALL GREEN (GROUND) TO HANGER BRACKET WHITE (FOR LIGHT) BLUE (FOR LIGHT) 2. Connect the wires from the outlet box to the corresponding wires on the receiver.
Installing the Wall Control 10 8 White White Black (to fan) Red Black (from breaker) Black Copper Green (Ground) Ground White (Neutral) Wall outlet box Wall control NOTE: Wall Control not included. A bluetooth wall control accessory can be purchased separately. NOTE: For multi-location wiring, skip to the next step. 1.
10 Installing the Wall Control 9 if Applicable Wall Controller 1 Wall Controller 2 Wall Controller 3 White to Fan Black to Fan HOT IN Green White Red Black Green White Red Black Green White Red Black Green to Fan Green 1. Install the wall control using the wiring diagram above. 2. Individually pair each of the wall controls with the fan receiver using the pairing instruction.
Finishing the Installation 10 1. Secure wire connectors with supplied wire ties. Installing the Trim Ring 11 11 1. Install the trim ring as shown. 2. Install motor housing to mounting plate with the screw removed as in Step 2.
12 12 Installing the Adapter Plate 1. Remove 1 of 3 screws and loosen the others (do not remove). 2. Using the screw from the previous step, install the adapter plate.
Installing the Luminaire Module 13 13 NOTE: If you are not installing the luminaire module skip to step 13. 1. Attach LED wires from motor assembly to luminaire module.
13 Installing the Luminaire Module 14 2. Secure the luminaire module with the 3 screws to the adapter plate. 20 15 3. Install glass shade or luminaire cover without over-tightening.
Controlling the Fan 16 17 14 18 A Summer Mode B (Counter-Clockwise) Air-Gap Switch* C Wall Control Remote Pairing Unpairing * Air-Gap Switch only included Control Press and hold buttons To purge, press and hold buttons for 4 seconds. with wall control for 10-15 seconds. Your fan is pre-paired. If you need to pair your fan refer to step 17.
14 Controlling the Fan Breeze Mode Controlling Multiple Fans with Remote or Wall Controls 1. Your remote and wall controls are capable of controlling multiple fans. A remote or wall control has the ability to control an unlimited number of fans with the only limitation being the Bluetooth® range of the control and fan. Breeze Mode mimics the natural ebb and flow of winds in nature by varying the fan speed. NOTE: Breeze Mode always rotates your fan in the Summer (CCW) direction 2.
Controlling the Fan 14 19 Fan On/Off Light On/Off Fan Direction Press and hold button for 4 seconds. Press and hold button for 4 seconds. Press and hold button for 4 seconds. Fan On/Off: Press and hold button for 4 seconds. The LED on the remote will flash green and all connected fans will beep to indicate the message has been received. All fans will turn off. This will bring all fans controlled by the remote into sync. Light On/Off: Press and hold button for 4 seconds.
15 Factory Reset 20 21 Fan Wi-Fi Reset Press and hold the and until the LED 22 Factory Reset Receiver Factory Reset Press and hold buttons for 10 seconds Press the reset button on the receiver remains red and the receiver beeps NOTE: Changes to your Wi-Fi network settings (SSID or Security Passphrase) will prevent your fan from connecting to the cloud.
Application 16 In addition to the included wall control, you can control your fan with the remote control (sold seperately) or through the Modern Forms app. 1. To use the Modern Forms app, download it for free from the App Store or Google Play. 2. Open the app to create your account. You can also log in using your Facebook or Google account. 3. To set up a Wi-Fi connection you will need the SSID and Wi-Fi password for the network you wish to connect to. 4.
16 5. Application The Modern Forms app will walk you through the main screen and show you how to create schedules, change fan speeds, dim the light, switch between Summer and Winter Modes, invite users, create groups and much more. Please refer to the Modern Forms app instructions for more details.
Accessories Product Wi--Fi Touch Panel Wall Control Bluetooth Wall Control Model F-TS Description Full app control Sold separately 17 Finish BK, WT 6 fan speeds, dims light to 1% F-WCBT-WT Works in conjunction with Modern Forms Smart Fan receiver WT (not included) Bluetooth Remote Control FH-W2004 F-RCBT-WT Compatible with Modern Forms Smart Fans 6 fan speeds, dims light to 1% WT 27
Certificate of Warranty Congratulations on your new purchase. Your new Modern Forms Smart Fan is engineered to make life easier every day. Modern Forms creates future-forward fans and luminaires that provide energy savings and outstanding efficency. Our dedication to doing things the right way goes beyond our love for amazing products.
Félicitations pour votre nouvel achat. Votre nouveau ventilateur intelligent Modern Forms est conçu pour vous simplifier la vie au quotidien. Modern Forms crée des ventilateurs et des luminaires d’avant-garde qui permettent des économies d’énergie et une efficacité exceptionnelle. Notre engagement à bien faire les choses va au-delà de notre amour pour les produits étonnants.
F H - W2 0 0 4 modernforms.
