TipTop Installation Instructions works with the Google Assistant
Please read and save these instructions before installation DO NOT RETURN TO STORE 2 TipTop Instructions FH-W2004
General Inquiries For all questions about your ceiling fan please read all included instructions, installation procedures, troubleshooting guidelines and warranty information before starting installation. For missing parts or general inquiries call our trained technical staff at: 1-866-810-6615 option 0 MON-FRI 8AM-8PM EST Email: customerservice@modernforms.com Or live chat at modernforms.com Fan Support For fast service have the following information below when you call: 1. Model Name and Number 2.
Safety Rules For operation, maintenance, and troubleshooting information, visit http://modernforms.com/fan-support/ To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker before beginning. All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70” and local electrical codes. Electrical installation should be performed by a licensed electrician. The fan must be mounted with a minimum of 7 ft. (2.
WARNING: Do not install or use your fan if any part(s) is/are damaged or missing. This product is designed for use only with the supplied parts and/or accessories designated for use with this product by Modern Forms. Substitution of parts or accessories not designated for use with this product by Modern Forms could result in personal injury or property damage and will void the warranty. Contact an authorized dealer or the manufacturer if any parts are damaged or missing.
Get Smart... works with the Google Assistant Integrates seamlessly with: devices you already own Wet Location-listed to the strictest UL/cUL safety regulations.
Contents 1. Mounting Options 10 2. Installing the Mounting Bracket 12 3. Attaching the Fan Blade 12 4. Adding the Decorative Trim Ring 12 5. Hanging the Fan 14 6. Making the Electrical Connections 16 7. Installing the Optional Wall Control 18 8. Finishing the Installation 20 9. Installing Adapter Plate 20 10. Installing the Luminaire Module 22 11. Controlling the Fan 24 11. Reset 26 12. Breeze Mode 26 13. Application 26 14. Accessories 28 14.
Package Contents 1. Fan Blade RPL-F2004-***-BD-** 6. LED Module F3IN-120V-R1-30 2. Mounting Bracket RPL-F2004-HGR-** 7. 3. Adapter Plate 8. Receiver F-R3-2004-*** 4. Motor Housing 5. Decorative Trim Ring RPL-F2004-TRIM-** ** denotes finish code of fan PC Shade RPL-F2004-GLA 9. Remote Control F-RCBT-WT *** denotes blade sweep of fan Hardware Bag RPL-F2004-PARTS • Safety Cable 6.
Hanging Weight: 19 lbs MAC ID IMPORTANT: Please make note of the MAC ID on the receiver and keep it in a safe place.
1. Mounting Options CAUTION: To prevent electrical shock, ensure electricity has been turned off at the circuit breaker before beginning. If there isn’t an existing UL/cUL listed outlet box, please refer to the following instructions. Secure the outlet box directly to the building structure. Use appropriate fasteners and building materials. The outlet box and support structure must be able to fully support the moving weight of the fan (at least 35 lbs/15.9 kg). Do not use plastic outlet boxes.
1 1. 3 1 2 Support Brace 2. Outlet Box 3.
2. Installing the Mounting Bracket Remember to disconnect the power at the circuit breaker. 1. Remove 1 set screw from mounting bracket and set aside for use in Finishing the Installation. 2. Pass supply wires through mounting bracket and secure to outlet box. 3. Attaching the Fan Blade 1. Place blade on motor and secure with the blade attachment, screws and washers. 2. Insert blades in slots, aligning with motor assembly holes. 3. Secure blades with blade attachment screws & washers. 4.
2 3 4 4A FH - W 2 0 0 4 TipTop Instructions 13
5. Hanging the Fan 1. Remove 2 opposing screws and loosen the others. 2. Pass supply wires through mounting plate. 3. Lift motor assemby and hang it on the hook on the mounting plate using one of the screw holes. 4. Secure the safety cable into the structure beams using the wood screw, washers, and spring washers provided. NOTE: Safety cable is required for all installations in Canada. Safety cable is required for ceiling fan and light combinations over 35 lbs.
5 FH - W 2 0 0 4 TipTop Instructions 15
6. Making the Electrical Connections WARNING: Installation of this fan requires that a three-conductor cable (including ground wire) which should run between ceiling and wall outlet box. WARNING: Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire nuts, except for the ground wire. Insert the receiver into the mounting bracket with the flat side of the receiver facing the ceiling (Fig. 6). Motor to Receiver & Receiver to house supply wires (Fig. 6A). 1.
6 1. 1 Mounting Bracket 2. Receiver 2 6A Outlet Box Black(Hot) can be RED from Switch leg Black(Line in H) GREEN(Ground) WHITE(Neutral) WHITE(Line in N) GREEN(GND Must Use) Receiver GREY(to Motor) YELLOW(to Motor) RED(to Motor) RED(to Motor) YELLOW(to Motor) BLUE (to Light) WHITE(to Light) GREEN(Motor Assembly Ground) WHITE(Neutral) BLACK (for Light) GREY(to Motor) Follow the steps below to connect the fan to your household wiring. Use the plastic wire nuts with your fan.
7. Installing the Optional Wall Control NOTE: Wall Control not included. A bluetooth wall control accessory can be purchased separately. 1. Connect the green wire marked “GROUND” from the wall control to the copper wire from the wall outlet box that feeds back to the circuit breaker – important for proper fan function (Fig. 6). 2. Connect the black wire marked “LINE IN” from the wall control to the black LINE VOLTAGE wire from the wall outlet box that feeds back to the circuit breaker (Fig. 6). 3.
7A 1 2 3 1. Wall Outlet 2. Wall Control 3. Wall Mounting Plate 4. Mounting Plate Screws 5. Wallplate 4 5 Multi-location wiring Individually pair each of the wall controls with the fan receiver using the pairing instruction. See page 22.
8. Finishing the Installation 1. Secure wire connectors with supplied wire ties (Fig. 8). 2. Install motor housing to mounting plate with the screw removed as in Step 2. Remove the motor from the hook on the mounting bracket. Slide the motor up to the mounting bracket and place the key hole on the motor over the screw on the mounting bracket. Turn motor until it locks in place at the narrow section of the key holes. Align the circular hole on canopy with the remaining hole on the mounting bracket.
8 9 8A FH - W 2 0 0 4 TipTop Instructions 21
10. Installing the Luminaire Module 1. Attach LED wires from motor assembly to luminaire module. 2. Secure the luminaire module with the 3 screws to the adapter plate (Fig. 10). 3. Install glass shade without over-tightening (Fig. 10B).
10 10A 10B FH - W 2 0 0 4 TipTop Instructions 23
11. Controlling the Fan Your fan was delivered to you with the included control already paired to your fan. A: Light On/Off, Bright/Dim B: Fan On/Off, Speed Up/Down C: Season (Summer/Winter) Air-Gap Switch: Pull tab to power off in case of emergency. Not necessary for normal fan operation (only included with wall control). NOTE: Your fan features 6 speeds. An audible tone will indicate when the speed is increased or decreased. When the fan has reached the minimum/maximum speed level the fan will beep twice.
11 11A A A B B C Air-Gap Switch* Wall Control * Air-Gap Switch only included with wall control C Remote Control Summer Mode Winter Mode (Counter-Clockwise) (Clockwise) 11B Fan On/Off Light On/Off Press and hold button for 4 seconds. Fan On/Off: Press and hold Press and hold button for 4 seconds. Fan Direction Press and hold button for 4 seconds. button for 4 seconds. The LED on the remote will flash green and all connected fans will beep to indicate the message has been received.
11. Reset If advised by fan support, you can reset your fan to factory settings by referring to (Fig. 12A) or (Fig. 12B). NOTE: If you change your Wi-Fi settings (SSID or Security Passphrase) you will require a Wi-Fi reset. Refer to Fig. 12 and then use the Modern Forms app to connect your fan to the new network. 12. Breeze Mode Breeze Mode mimics the natural ebb and flow of winds in nature by varying the fan speed. NOTE: Breeze Mode always rotates your fan in the Summer direction. 1.
11C 12 Pairing Unpairing Fan Wi-Fi Reset Press and hold buttons for 10-15 seconds. To purge, press and hold buttons for 4 seconds.
14.
14. Troubleshooting My Fan Will Not Start 1. Check main and branch circuit fuses or circuit breakers. 2. Check line wire connections to fan and switch wire connections in the switch housings. CAUTION: Make sure the main power is turned off! My Fan is Noisy 1. Allow for 24-hour break-in period. Most noises associated with a new fan will go away during this time period. 2. Check to make sure the screws which attached to the blades (and blade arms when applicable) are tight. 3.
14. Troubleshooting cont. My remote or wall control is not controlling my fan Verify that the fan is receiving power by power cycling the fan. To do this: 1. Cut power to the fan via standard On/Off wall switch, or the breaker if standard wall switch is not applicable. 2. Wait at least 10 seconds, and then restore power. 3. The fan will power on in Pairing mode for 3 minutes. 4. Press and hold 10-15 seconds. and buttons on remote control for 5.
My Fan failed to join the Wi-Fi network 1. Make sure you entered the correct Wi-Fi password and your mobile device is connected to the same network you attempted to connect the fan. 2. Make sure you are within the router manufacturer’s specified range. If all of these steps have failed - please power cycle your fan and router and retry. What is power cycling and how do I power cycle my fan? Power cycling is the act of temporaily removing the power source for your fan.
Certificate of Warranty Congratulations on your new purchase. Your new Modern Forms Smart Fan is engineered to make life easier every day. Modern Forms creates future-forward fans and luminaires that provide energy savings and outstanding efficiency. Our dedication to doing things the right way goes beyond our love for amazing products.
parte del distribuidor y, en consecuencia, cualquier daño consecuencial o costo de mano de obra que surja de un defecto se excluye expresamente. Esta garantía no se aplicará a los productos que hayan sido alterados, instalados incorrectamente, mal manejados o mal utilizados. La notificación de un defecto por escrito debe ser recibida por Modern Forms dentro de los cinco (5) años a partir de la fecha de compra (o según el período de tiempo indicado en el material).
TipTop Instructions FH-W2004
FH - W 2 0 0 4 TipTop Instructions 35
FH -W 2004 modernforms.