User's Manual

English
13
3 After about 5 seconds, the unit will exit
from bass/treble setting.
» The display will show the current
selected mode.
» You may now press the Vol+/Vol–
button to adjust volume.
Dolby sound mode
Experience an immersive audio experience with
Dolby sound modes.
1 Press button on the remote control to
turn Dolby mode on or off.
• On: Create a Dolby listening
experience.
• Off: Two-channel stereo sound. Ideal
for listening to music.
Set display brightness
You can press Dimmer repeatedly to select a
different brightness level of the display panel on
this product.
Bluetooth Operation
Through Bluetooth, connect the Soundbar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio les stored on the
device through your Soundbar speakers.
What you need
• A Bluetooth device which supports
Bluetooth prole A2DP, AVRCP and with
Bluetooth version as 4.2 + EDR.
• The maximum operational range between
the Soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
1 Press the button repeatedly on the
unit or press the Source button on the
remote control to switch the Soundbar to
Bluetooth mode.
» NO BT is displayed on the display
panel.
2 On the Bluetooth device, switch on
Bluetooth, search for and select PHILIPS
TAPB603/37 to start connection (see the
user manual of the Bluetooth device on
how to enable Bluetooth).
3 Wait until you hear “Paired” voice prompt
from the Soundbar.
» If the successfully connected, BT is
displayed on the display panel.
4 Select and play audio les or music on
your Bluetooth device.
• During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
• If your Bluetooth device supports
AVRCP prole, on the remote control
you can press
/ to skip to a
track, or press
/Pair to pause/
resume play.
5 To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•
The music streaming may be interrupted by obstacles
between the device and Soundbar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
• If you want to connect your Soundbar with another
Bluetooth device, press and hold
/Pair on the
remote control to disconnect the currently connected
Bluetooth device.