SDS

ManualsBrandsMK DIAMOND ManualsDiamond Saw BladesMK Diamond products® 7" Turbo Rim Diamond Blade for Masonry

SECTION 1. IDENTIFICATION

SAFETY DATA SHEET

PRODUCT IDENTIFIER

DIAMOND BLADES (METAL BONDED AND ELECTROPLATED), DIAMOND CORE BITS, DIAMOND CUP

WHEELS AND DIAMOND GRINDING DISKS

RECOMMENDED USE

GRINDING, CUTTING AND DRILLING OF MASONRY AND CONCRETE PRODUCTS

MANUFACTURER / DISTRIBUTOR

MK DIAMOND PRODUCTS, INC.

1315 STORM PARKWAY

TORRANCE, CA 90501

P: 800-421-5830

F: 310-539-5158

MK DIAMOND PRODUCTS, INC.

1315 STORM PARKWAY

TORRANCE, CA 90501

P: 800-421-5830

F: 310-539-5158

EMERGENCY PHONE NUMBER

310-257-2825

SECTION 2. HAZARDS IDENTIFICATION

PRECAUTIONARY STATEMENTS

AVOID INHALATION OF DUSTS AS WELL AS PROLONGED AND REPEATED CONTACT WITH SKIN. MOST DIAMOND

TOOLS ARE USED ALONG WITH WATER TO KEEP BLADES COOL AND TO DECREASE AIRBORNE CONTAMINANTS.

FOR DRY SAWING AND GRINDING, MAINTAIN ADEQUATE VENTILATION OR USE LOCAL EXHAUST.

DESCRIPTION OF HAZARDS

DUST CREATED BY GRINDING AND/OR SAWING CAN CAUSE IRRITATION TO EYES, NOSE, THROAT AND SKIN.

LONG TERM OVEREXPOSURE TO DUSTS CAN LEAD TO RESPIRATORY IMPAIRMENT.

GRINDING OR SAWING MAY PRODUCE AN ELEVATED NOISE WHICH CAN AFFECT HEARING.

PARTICLES OF VARIOUS SIZE EJECTED DURING GRINDING OR SAWING MAY POSE IMPACT HAZARDS TO EYES

AND SKIN.

SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS

SUBSTANCE DESCRIPTION CAS#

DIAMOND 7782-40-3

NICKEL 7440-02-0

COBALT 7440-48-4

IRON 7439-89-6

COPPER 7440-50-8

TIN 7440-31-5

TUNGSTEN CARBIDE 12070-12-1

MANGANESE 7439-96-5

Summary of content (4 pages)

PAGE 1
SAFETY DATA MK DIAMOND PRODUCTS, INC. 1315 STORM PARKWAY TORRANCE, CA 90501 SHEET P: 800-421-5830 F: 310-539-5158 SECTION 1. IDENTIFICATION PRODUCT IDENTIFIER DIAMOND BLADES (METAL BONDED AND ELECTROPLATED), DIAMOND CORE BITS, DIAMOND CUP WHEELS AND DIAMOND GRINDING DISKS RECOMMENDED USE GRINDING, CUTTING AND DRILLING OF MASONRY AND CONCRETE PRODUCTS MANUFACTURER / DISTRIBUTOR MK DIAMOND PRODUCTS, INC.
PAGE 2
SAFETY DATA SHEET SECTION 4. FIRST AID MEASURES INHALATION IF SYMTOMS DEVELOP (COUGHING, WHEEZING, SHORTNESS OF BREATH, ETC), REMOVE FROM EXPOSURE AND OBTAIN MEDICAL ASSISTANCE, AS NEEDED. SKIN CONTACT IF IRRITATION OCCURS, WASH AFFECTED AREAS WITH SOAP AND WATER. OBTAIN MEDICAL ASSISTANCE, AS NEEDED. EYE CONATCT IF IRRITATION OCCURS, FLUSH WITH LARGE AMOUNTS OF WATER. OBTAIN FIRST AID AND MEDICAL ASSISTANCE, AS NEEDED. INGESTION OBTAIN MEDICAL ASSISTANCE. SECTION 5.
PAGE 3
SAFETY DATA SHEET APPROPRIATE ENGINEERING CONTROLS AVOID INHALATION OF DUSTS AS WELL AS PROLONGED AND REPEATED CONTACT WITH SKIN. DURING SAWING OR GRINDING, MAINTAIN ADEQUATE VENTILATION OR USE LOCAL EXHAUST FOR DUST CONTROL. HANDLE IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE AND SAFETY PRACTICE. WASH HANDS BEFORE BREAKS AND AT THE END OF WORKDAY. PERSONAL PROTECTIVE EQUIPMENT RESPIRATORY PROTECTION WEAR NIOSH APPROVED RESPIRATOR IF AIRBOURNE DUST CONCENTRATIONS EXCEED PEL OR TLV LEVELS.
PAGE 4
SAFETY DATA SHEET ROUTES OF ENTRY ROUTE OF ENTRY, INHALATION: YES ROUTE OF ENTRY, SKIN: NO ROUTE OF ENTRY, INGESTION: NO SYMPTOMS OF EXPOSURE ACUTE: IRRITATION, COUGHING, WHEEZING, SHORTNESS OF BREATH DELAYED / CHRONIC: RESPIRATORY CONDITIONS SECTION 12. ECOLOGICAL INFORMATION PRODUCTS HAVE NO ECOLOGICAL EFFECTS WHEN PROPERLY USED AND STORED. AN ENVIRONMENTAL HAZARD CANNOT BE EXCLUDED IN THE EVENT OF UNPROFESSIONAL HANDLING OR DIAPOSAL. NO DATA AVAILABLE. SECTION 13.