Owner's manual

SW 838023

GB Shuttle Manual 100316

Appendix

Use the arrow keys to select a new value:

(5 dB increments.)

Conﬁrm the new setting:

The actual setting is shown immediately:

(Value in dB.)

Shuttle

is ready for a new selection of a password protect-

ed menu after pressing 'Enter'.

(Re-entering the access code is not necessary if a menu

selection is made within 5 minutes.)

Press 'Escape' if no further password protected menu

selections are needed …

... or conﬁrm with 'Enter' that the changes should be saved,

whereupon Shuttle

revert to normal read-out, and the next

password protected menu can be selected.

(Press 'Escape' if the changes should not be saved.)

Max. ampliﬁcation level

Enter the access code (see page 58) and press 'Shift' + 'A':

If Shuttle

periodically has a system error and/or the level

readout jumps to a high or low level during measuring in

favourable conditions, it may be necessary to limit the ampli-

ﬁcation of the received echo. (See also page 66.)

The effect from electrical noise can also be reduced or elimi-

nated with this function.

Note: A reduction in the ampliﬁcation level may affect the

maximum measuring range.