Owner's manual

SW 838023

GB Shuttle Manual 100316

Display and keyboard

- the well is empty…

- the well is not empty…

The distance from the sen-

sor to the zero point or the

level read-out must be set

manually - see page 18.

Note: The dead band

varies for the different

sensor types: 35 cm for

types 200570, 200640 and

200660, and 80 cm for type

200630.

0.00 m

4 mA 20 mA

35 cm from sensor (types 200570,

200640 and 200660)

80 cm from sensor (type 200630)

Shuttle

will now indicate the current level in the tank or well

(0 m immediately after initial startup) and is now in service

as a regular level meter, i.e. without the use of the relays and

the analog output for control / alarm.

See the next section for basic settings.

35 cm from sensor

Level read-out = distance

between sensor and bottom

- (minus) the distance be-

tween sensor and surface.

At the same moment Shuttle

registers an echo, the zero point is automatically set to the

level that is present in the tank or well.

Furthermore, the mA output is set to 4 mA at the current zero point and 20 mA at a level cor-

responding to a distance of 35 cm from the ultrasonic sensor.

See also Appendix A, Technical Speciﬁcations begining on

page 37.