Instruction Manual

C) SETTING THE DAY
1. Pull the crown out to the 1st Click Position.
2. Turn the crown anti-clockwise to set the day.
* If the day is set between the hours of around 11:15 PM and 6:00 AM,
the day may not change on the following day.
3. After the day has been set, push the crown back to the Normal position.
D) USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/20 second united up to
maximum of 59min 59sec.
The chronograph 1/20 second hand keeps continuously for 30 seconds after starting,
and then stops at Zero position.
【Measuring time with the stopwatch】
1. Press button " A " to start the chronograph.
2. The chronograph can be started and stopped each time button "A" is pressed.
3. Press button "B" to reset the chronograph and chronograph minute and
second hands return to their Zero positions.
RESET
TIME
MEASUREMENT
STOP
"A"
"B"
"A"
"A"
"B"
2/3