User Guide

No. 99MBA038A
3-4
3.3 Aligning Part Coordinate System Using Circle
Centers as Reference
[Purpose of Practice]
To align the part coordinate system based on two circle centers, using the model
workpiece.
[Description of Operation]
The part coordinate system is set using the coordinate system alignment macro command
(4).
X
Y
(B)
(A)
(0, 0)
Fig. 3-3-1
[Operating Procedure]
Table 3-3-1
No. Operation Screen display and remarks
1
Preparing the workpiece
Set the model workpiece on the XY table as shown below,
and focus on it.
–
2
Selecting the coordinate system alignment menu
Press
.
The coordinate system alignment function menu is
displayed.
–
3
Selecting the coordinate system alignment macro
command (4)
Press the numeric key corresponding to
.
–