Operation Manual
Table Of Contents
- Contents
- Television Overview
- Connecting and Appendixes
- External Devices & NetCommand® Setup
- NetCommand® Pre-Memorized Devices
- Antenna or Wall Outlet Cable for Digital Broadcasts
- Separate UHF and VHF Antennas for Analog Broadcasts
- Single Analog Antenna or Wall Outlet Cable
- Cable Box
- Analog VCR to Analog Antenna or Wall Outlet Cable
- Analog VCR to a Cable Box
- Analog VCR with Composite Video and S-Video with Audio Connections
- A/V Surround Sound Receiver or Stereo System
- DVD Player with Component Video
- Satellite Receiver with S-Video
- DTV Connectors and Adaptors
- External Digital TV (DTV or HDTV) Receiver with Component Video Connections
- External Digital TV (DTV or HDTV) Receiver with RGB, HV Connections
- MonitorLink™ with MonitorLink
- External DVI Device with DVI-HD
- Computer with a PC Monitor Output
- IR Emitter NetCommand®
- IR Repeater
- Helpful Hints
- Appendix A: Cleaning and Service
- Appendix A: Cleaning the Dust Filter
- Appendix B: Lamp Cartridge Replacement
- Using the System Reset Button
- WL82913_OG2_rev1.pdf
- Contents
- Basic Functions
- NetCommand® Functions
- Programming the Remote to Control NetCommand® A/V Products
- 3D Graphical Viewpoint Menu System
- Remote Control with NetCommand® Setup
- NetCommand® Initial Setup Guide
- NetCommand Editing Guide
- NetCommand® Initial Setup
- Edit NetCommand®, Adding an A/V Receiver
- Edit NetCommand®, Adding Devices
- Edit NetCommand®, Change or Delete Devices, Finish Screen
- Device Selection
- TV Menu Screen Operations
- Special Features
- NetCommand® Controlled Peer-to-Peer Connections
- NetCommand Remote Control Buttons: Device Menu, Guide
- Recording on a NetCommand Traditional VCR, A/V Disc Search, Track List Screen
- Memory Card Playback
- PC Viewing
- Device Menu with NetCommand®
- Software Updates
- Operation of PIP and POP
- Display Formats
- TV Display Formats
- PC Display Formats
- Appendix A: Bypassing the V-Chip Lock
- Appendix B: Input Connection Compatibility
- Appendix C: Remote Control Programming Codes
- Appendix D: On-Screen Information Displays
- Appendix E: NetCommand® Specialized Device Keys
- Troubleshooting
- Using the System Reset Button
- Index
- Warranties
- Contents
38
39
Appendix A: Cleaning and Service
Cleaning
Normally, light dusting with a dry, non-scratching duster
will keep your TV clean. If cleaning beyond this is needed,
please use the following guidelines:
First, turn off the TV and unplug the power cord from the
power outlet.
Top and Sides of the TV:
• Gently wipe down your TV with a soft, non-abrasive
cloth such as cotton flannel or a clean cloth diaper,
lightly moistened with water. Dry with a second dry,
soft, non-abrasive cloth.
• For oily dirt, add a few drops of mild liquid detergent,
such as dishwashing detergent to the water used
to moisten the cloth. Rinse with a second cloth
moistened only with water. Dry with a third dry, soft,
non-abrasive cloth.
Screen behind the Diamond Shield™:
• Follow the instructions for the top and sides, however,
wipe gently in an up and down motion.
• Clean the entire screen evenly, not just sections of the
screen.
• Do not allow liquid to drip down the screen as some
liquid may enter the TV between the screen and the
screen frame.
• You may purchase Mitsubishi Screen Cleaner, part
number CLEANER-VSS, by calling (800) 553-7278.
Anti-Glare Diamond Shield™:
Anything abrasive can scratch the anti-glare coating
of the Diamond Shield™ and household and window
cleaners can remove the coating.
• Follow the instructions for cleaning top and sides,
however, moisten the cloth with only water.
• Do not use any cleaning chemicals on the Diamond
Shield™.
• DO NOT use Mitsubishi Screen Cleaner on the Anti-
Glare Diamond Shield™
Cloth speaker grills:
• Lightly brush with a soft cloth brush, or lint brush.
• If necessary, you can vacuum using the brush and
hose attachments of your vacuum cleaner. Do not
use the beater brush section on the grill cloth.
General Cleaning Warnings:
• DO NOT allow liquid to enter the TV through the
ventilation slots or any crevice.
• DO NOT use any strong or abrasive cleaners as
these can scratch the surfaces.
• DO NOT use any cleaners with ammonia, bleach,
alcohol, benzine, or thinners as these can dull the
surfaces.
• DO NOT spray liquids or cleaners directly on the
TV’s surfaces, apply to the cleaning cloth.
• DO NOT scrub or rub the TV harshly. Wipe it
gently.
Service
If you are unable to correct a problem with your TV, consult your Mitsubishi dealer or a Mitsubishi Authorized Warranty
Service Center.
• DO NOT adjust any controls other than those described in the Owner’s Guide books.
• DO NOT remove the protective back cover of your TV.
Menus not described and shown in the Owner’s guide books are designed for Factory use and for Authorized Service
Personnel. Damage caused to the TV by non-authorized changes or changes to these menus made by non-authorized
persons are not covered under warranty.
DO NOT use any kind of abrasive or liquid
cleaner on the surface of the TV screen
or Diamond Shield.
IMPORTANT