Operation Manual

3. TV Menus 23
For assistance call 1(800) 332-2119
Use the TVs channel menus to:
Save a list of favorite channels (see • page 10 ).
Define the source for the antenna input
Perform a channel scan
Limit
CH
/
CH
tuning to only the channels you want
Selectively scan for new channels
Add a single channel by RF channel number
Favorites
See page 10 for use of the Favorites menu.
Editing the Channel List
Use the Channel Edit menu so the TV tunes only to
the selected channels when using the
CH
/
key
.
Channels marked with a check are in memory.
Press
to move through channel numbers one
at a time.
To add or delete a channel from memory, highlight
the channel number and press
ENTER
to remove the
check.
To jump to a channel, enter the channel number,
including separator, and press
ENTER
. For example,
to jump to 36-1:
3
6
1
ENTER
.
Use the
Mark All
or
Unmark All
options if working
with many channel numbers.
Enter the channel number to jump quickly to a channel.
Checked channels can be tuned with the
CH
/
key.
Cha nnels
Changing the Channel Source
Highlight the source connected to the TVs antenna
input.
Air if you have an over-the-air antenna
Cable if you have direct cable service without a
box.
Press
ENTER
to confirm your selection.
Scanning Channels
Perform a channel scan after
Initializing the TV
Changing the source (switching between an over-
the-air antenna and direct cable service)
Repositioning the antenna
Transporting the TV to a different area
The channel scan will erase all custom channel settings
(channel locks, favorite channels, channel-list edits).
Note: Additive Scan must be OFF to enable a full
channel scan.