Submittal

Job Name:
System Reference: Date:
Specications are subject to change without notice. © 2020 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
Model: PAR-40MAAU Deluxe MA Remote Controller
• ON/OFF
- Switches between ON and OFF.
• Operation mode switching
- Switches between Cool/Dry/Fan/Auto/Setback/Heat.
• Hold
- Switches between enable and disable the Hold function.
- If the Hold function is enable, the following functions will be
prohibited.
- ON/OFF timer/Schedule (Weekly timer) /Auto return/Auto-
OFF timer
• Temperature setting
- Changes the set temperature.
- Set temperature range varies depending on the indoor unit
model.
• Fan speed setting
- Changes fan speed.
- Available fan speeds vary depending on the model.
• Air ow direction setting
- Changes airow direction.
- Available airow directions vary depending on the model.
• Louver setting
- Switches between louver ON/OFF.
• Ventilation equipment control
- Interlocked setting and interlocked operation setting with City
Multi Lossnay units can be performed.
- The Stop/Low/High settings of the ventilation equipment can
be controlled.
• Main display mode setting
- The Main display can be displayed in two different modes:
“Full” and “Basic.”
OPERATION/DISPLAY
FULL VIEW BASIC VIEW
• B&W inversion
- The colors of the display can be inverted, turning white
background to black and black characters to white.
• Clock *
2
- Date (year/month/day) and time (hour/minute) can be set.
- The set time as well as the day of the week will be displayed
on the Main display.
- It is also possible for the time to not display on the main
display.
- The clock can be displayed in 12-hour format (AM/PM before
or after the time) and 24-hour format.
• Daylight saving time
- The start/end time for daylight saving time can be set.
- The daylight saving time function will be activated based on
the setting contents.
• Room temp. display
- The room temperature display can be enabled or disabled.
• Error information
- When an error occurs, an error code and the unit address
appear.
- The air-conditioning unit model, serial number, and contact
number can be set to appear when an error occurs. (The
above information needs to be entered in advance.)
• Filter information
- A lter sign will appear when it is time to clean the lter.
• Remote controller information
- The version of the remote controller can be checked.
*1 This function is active only for the units that support the function.
*2 The clock is accurate within 45 seconds per month (at the temperature of 77°F
[25ºC]).
The clock is backed up for 3 days.