Specifications

English-17

English

P-2 Installing the monitor (continued)

Carry out as necessary

Using the monitor without the bezel

CAUTION:

• MDT552S satisﬁ es the UL requirements as long as it is used

with the bezel attached. When using the monitor without

the bezel, in which case the monitor doesn’t satisfy the UL

requirements, cover the UL certiﬁ cation marking on the rear

panel with the supplied label.

• To prevent static damage to circuit boards, attach the

protective cover to the LCD panel.

1. Assemble the supplied protective cover according to the

following procedure.

2. Unscrew the screws (a) that hold the bezel to remove the

bezel from the monitor.

CAUTION:

If you remove other screws than the screws (a), the bezel

falls apart. If you do so, the bezel may fall, causing injury or

damaging the monitor.

(a)

3. Peel off the separators from the protective cover (b)

assembled in step 1 and then attach the protective cover to

the LCD panel.

CAUTION:

Never touch the circuit boards because they may be

damaged.

(b)

4. Cover the UL certiﬁ cation marking on the rear panel with

the supplied label (c).

(c)

Peel off the separators.

(a): Screws for securing the bezel (M3, 14 pcs.)