Assembly Instructions

OPEN WRENCH
K17
Qty: 01
BOLT
0.39" x 2.36"
Ø 10mm x 60mm
Qty: 08
WASHER
0.39" x 0.91" x 0.08"
Ø 10mm x 23mm x 2.0mm
Qty: 08
1 TABLE TOP x 1
2 LEGS x 2
Step 1: Step 2:
Before Starting:
4X
- Carefully turn table over and stand on its legs.
- Completed item.
Assembly Instructions
C
1. Choose a clean, level, spacious assembly area. Avoid hard
surfaces that may damage the product.
2. Always read the instructions carefully before beginning
assembly to ensure that you have all required contents.
3. To prevent choking hazards, keep the packaging material out
of reach of small children
4. Do not over tighten the bolts as this may damage the thread.
5. Use only vendor supplied hardware to assemble. Using
unauthorized hardware could jeopardize the structural integrity
of the item.
6. The use of power tools to aid in assembly is not
recommended. Power tools can damage hardware and split
wood.
- Assemble the Legs (2) into the Table Top (1) as picture. Tighten all Bolts (B) and
Washers (C) by using Open Wrench (A).
Hardware and Tools
Components:
A
B
KEEP INSTRUCTIONS
FOR FUTURE USE
ASSEMBLY REQUIRES
TWO PEOPLE
Page 1 of 1