Packing List — (# Expansion plug 28 Screw M5 Aluminum alloy bar L-Mounting Clip Ales Tape measure Spirit level Electric drill Screwdriver Hammer Drill bit Pencil Note: Please carefully read the following before installing 1. Before installing the product, please carefully read the instructions and operate accordingly; 2. Before installing, please tum off the main power switch and ensure that it won't tum on; 3. The installation of this product requires that the staff has sore electrical knowledge; . 4.
installation method of Surface Mount 1. Fixing the bar 1.10pen the product packaging, and check whether the product has any exception or functional damage; If yes, please re fum it to the dealer. 1.2 After selecting the location of the minor cabinet, check whether the wall is solid, masseurs the distance of the holes (A, in the aluminum alloy bar with a tape measure and mark it on the wall with a pencil (Fig. 1). 1.
2. Positioning and Installation of Mirror Cabinet: 2.1 Lock the L-Mounting Clip at the bottom of the cabinet (Fig. 3}, Left {big door}, Right{small Left (slam door}, Right{big 2.2 Lock the side fixing block to the cabinet with screws(Fig 4). 2.3 Insert the surrounding aluminum plate into the cabinet 2.4 Install the mirror cabinet on the hanging strip see details in Fig 8. Choose right locating place and usa pencil to make sign on the wall through the base fixing the hole (Fig .6-c} 2.
Positioning and Installation of Miro Cabinet 1.1 remove top and bettor block and then remove the left and rife side panel see (Fig 8). 1.2 Remove the L-Mounting Clip from ths bottom of the 1.3 Lock the nut back to the screws(Fig. 10). 1.4 Remove the screw by 3mm, then take out the fixing block and screw it back to secure the cabinet{Fig. 11). 1.5 Remove the fix boccie see (Fig. 12). 1.6 Remove the cookhouses (Fig. 13}. 1.7 Measuring the wall size of the cabinet {Fig 14} 1.
Mirror Door Adjustment 11 Fix tha mirror cabinet, and check if the mirror door iz flat; f not (as shown in Fig.18), adjust the distance of the door opening by adjusting the hinge screw (b) and keep the door level (Fig.20). Rotate CW: Door moves to the center of the mirror cabinet Rotate CCW: Door moves to both sides of the mirror cabinet Fig.
1. 2If the cabinet door isn't flat (Fig.21), adjust the distance between the door and the cabinet by adjusting the screw {c) to make the door fiat. (Fig.22) A Naming: The distance between the door and the cabinet should not be too small, otherwise the door can’t be opened and may lead to the door rupture. Fig.21 == Rotate CW: Distance between door and cabinet reduces Rotate COW: Distance between door and cabinet increases Fig.
1. 3 Loosen the snap screw {d) of the shelf io adjust the shelf position. (Fig.23 d A Safety Warning Fig.
MISNOMER Care and Cleaning Clean the mirror with a soft, damp cloth and dry thoroughly with a soft towel. Do NOT allow the edges of the mirror to get or remain wet over a period of time. Please do NOT use glass cleaner that contains ammonia or vinegar. Never spray any cleaner directly onto a mirror. Instead apply the cleaner to a soft cloth and then wipe the mirror. Make sure no commercial cleaner comes in contact with the edge or backing.
