Use and Care Manual

ManualsBrandsMiscool ManualsFire Pit TablesKazz Brown 50 in. x 30 in. x 25 in. H Rectangle Metal Outdoor Fire Pit Table, Auto-Ignition

Attention

ASSEMBLY INSTRUCTIONS

Fire Pit Table_GGOT0051

fective solutions. W

e also have the assemble

days or contact us for more help. If you already have all boxes, please kindly send us mes

3. If there is any damage, please send clear photos about damaged part to us as attachment,

fer you best solution soon. (After-sales mailbox: info@homrest.com)

AAA

please contact us at any time, we will provide ef

1. W

video on the product details page to help you install this fire pit table.

e are concerned about each customer's experience, if there is any missing or damage,

2. Come with multiple boxes, please check if you already received all boxes we shipped to

you. Sometimes these boxes will not arrive in same date, hope you can wait for 2-3 more

sages to let us know the name of missing part regarding to the first page of instructions. W

will send replacement to you asap. (After-sales mailbox: info@homrest.com.)

This fire pit table need a 1

we will check and of

1.5V battery to ignite.(Note:

4. The battery is Not included.）

Summary of content (19 pages)

PAGE 1
Fire Pit Table_GGOT0051 ASSEMBLY INSTRUCTIONS Attention 1. W e are concerned about each customer's experience, if there is any missing or damage, please contact us at any time, we will provide ef fective solutions. We also have the assemble video on the product details page to help you install this fire pit table. 2. Come with multiple boxes, please check if you already received all boxes we shipped to you.
PAGE 2
PAGE 3
PAGE 4
1 1 2 3 3 6 6 7 11 14 14 11 13 16 17 14 17 14 17 14 18 15
PAGE 5
1
PAGE 6
2
PAGE 7
3
PAGE 8
LEAKTEST:Apply the solution to the Lp gas delivery system at points: 1.Fire Table Valve Coupling 2.Gas Hose Regulator 3.Cylinder Valve Coupling Cylinder Shut Off Valve Heat Sensitive Hand Wheel Regulator Check Valve Nipple With Flow Limiting Device LEAKTEST:Apply the solution to the Lp gas delivery system at points: Fire Table Valve Coupling;Gas Hose Regulator & Cylinder Coupling.
PAGE 9
5
PAGE 10
ASSEMBLY INSTRUCTIONS_GGOT0051 SECTION1:ASSEMBLY Box_A Parts List Q P Burner 1PC Glass Fire Stone 1PC Box_B Parts List R S T 1PC 1PC A Box_C Parts List C D B 1PC F 1PC G Short(M4*8mm) 1PC 1PC 2PCS (M6*35mm) 8PCS E 1PC I Small Plastic gasket J 18PCS U Dust cover 1PC -6- (M6*15mm) 3PCS 8PCS O N Washer(M6mm) 1PC (M6*10mm) 1PC M L (M6*20mm) 1PC H Handlebar K 1PC M8*55 1PC Allen Key(M6mm) 1PC
PAGE 11
Assembly Drawing Of Round Fire Pit Table WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this appliance may result in property damage or personal injury.
PAGE 12
STEP4 N A L M STEP5 K M D STEP6 S -8-
PAGE 13
STEP7 P I STEP8 O G H F STEP9 T U -9-
PAGE 14
Note: Glass Rocks shall be arranged neatly and evenly in the burner tray. Ensure igniter cover is not covered by glass rocks (see photo). This helps air circulate. Take care to keep rocks out of the igniter cover. Keep igniter clean of dust. For best flame results adjust the rocks to expose the burner tube holes. Our preferred configuration is pictured here. WARNING: Never handle glass rocks which have not been allowed to cool from exposure to flame. Never attempt to rearrange rocks while unit is ignited.
PAGE 15
NOTE TO USER: Before igniting the unit for the first time, follow steps one through 5 in the below Ignition section.1AAA 1.5V battery is needed（NOT included） WARNING: When the user starts the ignition operation, ensure that the environment is dry, carefully follow the six steps strictly to ignition operation. The wrong operation may: 1. prevent ignition operation. 2. cause gas leakage and explosion.
PAGE 16
! WARNING: Ensure that no parts of your body, clothing, or any other combustible material are above the burner before, during and after ignition. Ensure the cover is stored safely away from the Fire Table when the Fire Table is in use. STEP7 Once the unit is burning normally, set the dial to desired flame height. STEP8 PERIODIC INSPECTION OF BURNER FLAMES Upon igniting the appliance, visually verify that the burner is indeed burning as demonstrated in the image.
PAGE 17
FIRE TABLE WON'TLIGHT? IGNITION PROBLEM? IGNITION TROUBLESHOOTING STEP 1 Wait 5 minutes for any gas to dissipate. Locate the igniter cable under table. Ensure the igniter cable is firmly attached to the gas valve. Follow the ignition sequence again. If still no results after three tries move to step 2 below. STEP 2 Turn the gas cylinder valve to the "Closed"position. Wait 5 minutes for any gas to dissipate. Ensure igniter cover is not covered by glass rocks. This helps air circulate.
PAGE 18
14
PAGE 19
WARNING NOTES: • Expected burn time; the anticipated burn time for your Fire Table using a full 20 lb (9kg) propane cylinder is between 12 and 18 hours depending on where the flame height is set. • This is NOT a toy. • The fire table will become extremely hot during operation!-DO NOT TOUCH THE BURNER TRAY OR GLASS ROCKS while fire table is in operation! • Do not place ANY cover on the fire table while the fire table is in operation.