Pre-Delivery/Install Checklist

PH: [phone]
Email: [e-mail]
Frame # 1 Frame # 2 Frame # 3
Room
Frame
Color
Measure Each Mirror Separately
Frame # 1
Frame # 2
Frame # 3
Width
Height
Clearance Around Your Mirror
Frame # 1
Frame # 2
Frame # 3
Top
Left
Right
Bottom
Existing Clips
Does your mirror have clips holding it to the wall? If not, skip this step.
If you should have any questions, please do not hesitate to contact us, we are here to help!
NOTE: Large or thick clips will prevent the frame from fitting properly
on your mirror. If you have clips, check Yes for clips and tell us how many you
have for each mirror and we will send replacement clips for free.
NOTE: Measure to the nearest 1/8 inch. Use 1/8, 1/4, 3/8,
1/2, 5/8, 3/4 or 7/8 inch. If in between, use the larger number.
NOTE: Measure the distance from each mirrors edge to
any switch, light fixture, wall, etc.. If an edge is flush, enter 0.
NOTE: IF you have a channel across the bottom of
your mirror, we need to know if you can fit a coin between
the channel & the mirror. If you can, please tell us in the
notes section when you order the frame.
Enter # of
clips for
each side.
Pre-Order Measurement Form
Before you place your custom on-line order for
a new mirror frame, use this form to help you
get all the proper information you will need to
correctly enter your order.