Operation Manual

Basic Operation:
→Manual work
※When LED Indicator lights on.
→ Check:
. Dust bin is full.
. Intake Valve is stuck with dirt.
. Wipe out the inner and outside of Intake Valve area.
1. Turn ON the power switch, wait for power LED light on(green).
2. Press power key.
3. After work is completed, the unit will emit a buzz of warning . The unit stop or back
to dock station for charging depends on the settings.
4. During the working time :
(1) The unit will stop if the power key pressed at the control panel or the stop key is
pressed on the APP.
(2) If low power, the unit will Beep one time and Power LED will RED on. The unit
will back to dock station for charging.
5. When the unit is at dock station or plug into adaptor:
(1) Charging : the power/time LED will show green flashing .
Full charged : the power/time LED will show green on .
(2) At dock station :
-Press ( ) power key or use the Start key on the mobile APP to let the unit
start to work.
-The unit will try to re-find the dock station again if it kicked away from the dock
station by careless. But the unit will stop if the dock station can't be found in
the near area.
Stop operation
1. To stop the operation of the unit immediately, you can turn off the power switch
on the right of the unit, or press unit control panel power button, or lift the unit off
the floor, the unit will stop 1 second later.
2. If you want the unit to continue working, place the unit on the floor and reset the
power switch of the cleaner.
Safety Devices
1. The unit will stop after 1 second lifted up from the floor.
2. The unit will stop when wheel jammed for more than 6~10 seconds.
Sleep mode
The unit stop and no key pressed in 3 minutes, unit into sleep mode. Any key
pressed will wake up the unit.
20
GENERAL OPERATION