Specifications

= Trailing Edge Erase =
•
The image along the trailing edge of the electrostatic latent image on the
surface of the PC Drum is erased by turning ON all LA3 LEDs. This
prevents the Fusing Rollers from being dirtied by excess toner and offset
from occurring as the trailing edge of the paper is fused.
•
The timing at which the trailing edge erase is switched from edge erase
varies depending on the mode (File Margin, Edge/Frame Erase) and
whether "Trailing Edge Erase" of the Tech. Rep. Choice is set to "Yes" or
"No," with reference to the SCEND signal output from PWB-J. See the
Table below.
"Yes" (4 mm) "No"
Normal
File Margin
Normal
File Margin
10 15 20 10 15 20
Erase Width (mm) 4 14 19 24 0 10 15 20
Timer (msec.) 255 225 210 195 270 240 225 210
M-68